Into the 7s in full street trim!
+6
Lem Evans
Nevs
windsor
Old blue Racin Team
billandlori
brain@fbracing
10 posters
Page 1 of 1
Into the 7s in full street trim!
brain@fbracing September 20th 2009, 11:18 am
Well, we've done it! Our first 7 second pass in full street trim! 7.97 @173mph
Our new all aluminum 598 is awesome!
On the first outing we ran 8.95 without nitrous on it's first "proper" full pass. we then ran 8.52 with 160hp of nitrous.
On our secon outing (last weekend) we started by doing a bit of n/a tuning- we inproved to 8.66 in 3 passes. we then turned the bottles on and ran 8.16 with a 300 shot and 7.97 with 400!
There is plenty more to come as we are looking to go to 500hp for the next meeting (our last one this year) and 600+ next season.
The 7.97 was achieved with only 10 passes on the motor and only 5 of those on the bottle............
The car:
'Glass 1934 ford 3 window coupe with full tube cds (sfi 25.4) frame
C&C 11.2 deck aluminum block, Home ported A460 heads, A460 tunnel ram with 2 x 1050s, Custom nitrous solid roller, bryant billet crank,
BME426 rods, Ross pistons, Neal Chance converter, 'Glide , 3.25 gears and M/T ET Street radials.
https://www.youtube.com/watch?v=rcXPwrYR8QE
Our new all aluminum 598 is awesome!
On the first outing we ran 8.95 without nitrous on it's first "proper" full pass. we then ran 8.52 with 160hp of nitrous.
On our secon outing (last weekend) we started by doing a bit of n/a tuning- we inproved to 8.66 in 3 passes. we then turned the bottles on and ran 8.16 with a 300 shot and 7.97 with 400!
There is plenty more to come as we are looking to go to 500hp for the next meeting (our last one this year) and 600+ next season.
The 7.97 was achieved with only 10 passes on the motor and only 5 of those on the bottle............
The car:
'Glass 1934 ford 3 window coupe with full tube cds (sfi 25.4) frame
C&C 11.2 deck aluminum block, Home ported A460 heads, A460 tunnel ram with 2 x 1050s, Custom nitrous solid roller, bryant billet crank,
BME426 rods, Ross pistons, Neal Chance converter, 'Glide , 3.25 gears and M/T ET Street radials.
https://www.youtube.com/watch?v=rcXPwrYR8QE
brain@fbracing- Posts : 16
Join date : 2009-09-18
Re: Into the 7s in full street trim!
billandlori September 20th 2009, 11:24 am
That sure is one bad ass Hot Rod.
Bill
Bill
Last edited by billandlori on September 20th 2009, 12:26 pm; edited 1 time in total
billandlori- Posts : 2081
Join date : 2009-08-06
Age : 55
Location : Stratford, Ontario, Canada
Re: Into the 7s in full street trim!
Old blue Racin Team September 20th 2009, 12:12 pm
Nice car man, its sure haulin to
Old blue Racin Team- Posts : 1579
Join date : 2009-07-03
Age : 34
Location : North Carolina
windsor- Posts : 1167
Join date : 2009-08-09
Location : St. Pete/Northern Va.
Re: Into the 7s in full street trim!
Nevs September 20th 2009, 2:36 pm
WOW, that's impressive 
Just think what you'll do with some more tuning
Just think what you'll do with some more tuning 
Nevs- BBF CONTRIBUTOR
- Posts : 2724
Join date : 2009-02-07
Age : 70
Location : NW Iowa(Odebolt)
Lem Evans- Posts : 7445
Join date : 2008-12-03
Location : Livermore , Ky -
Re: Into the 7s in full street trim!
billandlori September 20th 2009, 4:47 pm
You gotta love a street car that can carry the front wheels!!
Bill
Bill
Last edited by billandlori on September 27th 2009, 12:12 am; edited 1 time in total
billandlori- Posts : 2081
Join date : 2009-08-06
Age : 55
Location : Stratford, Ontario, Canada
Re: Into the 7s in full street trim!
Induction-Solutions September 20th 2009, 10:38 pm
That's pretty cool !! Congrats.. SJ
_________________
Steve Johnson
Induction Solutions
16121 Flight Path Dr.
Brooksville, Fl. 34604
Shop 352-593-5900
Cell 815-341-8853
www.InductionSolutions.com
Induction-Solutions- BBF VENDOR SPONSOR
- Posts : 314
Join date : 2009-08-27
Age : 60
Location : Brooksville, Florida -
D. Sea- Posts : 2768
Join date : 2008-12-02
Age : 55
Location : Kentucky
Re: Into the 7s in full street trim!
ThndrChkn September 22nd 2009, 8:53 am
Very cool indeed... That's flyin'...
Doug...
Doug...
ThndrChkn- Posts : 2216
Join date : 2008-12-04
Age : 57
Location : Helena, Montana
Re: Into the 7s in full street trim!
TravisRice September 26th 2009, 7:51 pm
Very nice. Looks like a good candidate for the pump gas drags over here. Veeeeeeeerrrrrry Cool. 
Travis
Travis
TravisRice- BBF CONTRIBUTOR
- Posts : 1192
Join date : 2009-02-07
New personal best!!!!
brain@fbracing September 29th 2009, 2:23 pm
Last pass of the year..........7.80 @ 174 mph
Sorted the launch and a couple of nitrous activation issues and now she REALLY flies!
Roll on 2010...................
https://www.youtube.com/watch?v=iKd67sI4_G0
Brain.
Sorted the launch and a couple of nitrous activation issues and now she REALLY flies!
Roll on 2010...................
https://www.youtube.com/watch?v=iKd67sI4_G0
Brain.
brain@fbracing- Posts : 16
Join date : 2009-09-18
Re: Into the 7s in full street trim!
Nevs September 29th 2009, 5:29 pm
brain@fbracing wrote:Last pass of the year..........7.80 @ 174 mph
Sorted the launch and a couple of nitrous activation issues and now she REALLY flies!
Roll on 2010...................
https://www.youtube.com/watch?v=iKd67sI4_G0
Brain.
Very cool. Congratulations
Nevs- BBF CONTRIBUTOR
- Posts : 2724
Join date : 2009-02-07
Age : 70
Location : NW Iowa(Odebolt)
Similar topics» Fox windshield trim
» So…? K-B pistons have mutable top ring gap setting why then is there such a big difference in gap between street and tow. 4.400 x .0065=.028 street
» 60 STARLINER / SUNLINER TRIM ???
» 66 Fairlane Headliner trim
» 2 c6 questions. bell housing ear trim and case swap(sb to bb)
» So…? K-B pistons have mutable top ring gap setting why then is there such a big difference in gap between street and tow. 4.400 x .0065=.028 street
» 60 STARLINER / SUNLINER TRIM ???
» 66 Fairlane Headliner trim
» 2 c6 questions. bell housing ear trim and case swap(sb to bb)
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum