Chuckathon: Help Chuck get back onto the Dragstrip

gotta call from Chuck he is on his way to get the car, I have a bunch of stuff going back with him... Have a safe trip Buddy....



Randy

Better watch him Randy. He might load up the '69 Cougar when you're not looking...

Good luck on the road trip Chuck!

John I am not so worried about him loading up my 69 as I am him loading up my 71 tube chassis Pinto.....


Randy

Chuck IN a Pinto....Need Video.

And yes, it is the kettle calling the pot black.
Gordon

That would be about as funny as Blake stuffing Jones in his car at the Bash 2 years ago...

ok Chuck is loaded and ready to make the treck back home with a fastback mustang... and extra parts to boot.......


Randy

jbozzelle wrote:That would be about as funny as Blake stuffing Jones in his car at the Bash 2 years ago...

I thought we were going to have to get a crane to pick the car up and shake him out

Good times! Did anybody get any pictures of that?

No pics that I know of, but I did get a call from Randy when it was all going down.

He was checking out an 83 GT for me that his buddy owns that was parked there too......

What's up guys?Its been a few days.Me,dad,and mom went to Texas to see the Coug and pick up the new ride.We got back today about 4:00pm this afternoon.I'm going to call Bill to see when is a go time to bring it down to him.My plan is at the bash will be the first public appearance for the new ride.So I've got about 5 1/2 months to get it ready .Nothing like a little pressure. Thanks again to everyone for your help.....

I also send Chuck home with a trans cooler for his Car....


Randy

Can you post a not to large picture up for us to see Chuck?

If you can use then I have a set of race collectors (new with evacupan fittings) valves are new and in fact collectors are chromed. I bought these years ago and never used them, I was able to buy off the shelf headers from Sanderson for my app. The chrome ones I believe are Hooker brand with the small adjustment tabs on them. The collectors are 4" and primaries are2.25" If interested you can send me a pm. Good luck getting the car together! Have a good 2010 season. Greg blown473

2nd message sent- not sure if the 1st got thru... I can donate a set of new chrome hooker race collectors w/evacupan fittings and brand new valves installed. they are 4" with 2.25 primaries. I will cover the shipping and insurance as well if you want them. I hope everyone will look around their garage or shop and see if they have any unused parts laying around that can help get you going again. Its tough in this terrible economy. Racing gives us a reason to live! Good luck! Greg blown473

Hey Greg I have been away from the computer for a few days.I can use the collectors it would save me some time and money.Thanks a lot. Chuck

Send me a message with where you want them shipped to and I'll get them on their way! Greg blown473

How about a pic of that new body Chuck...
Al

Al Martin wrote:How about a pic of that new body Chuck...
Al

The only pictures I've got right now are on the proven build section of the board page 3.I don't know how to move them over to this section.So if anyone knows please too so. THANKS

here you go Chuck
Jim



Here's a few pictures and more pictures on my photobucket account at this link

https://s45.photobucket.com/albums/f75/Phantasea466/BBF%20Forum%20Members/Chuck%2070%20Mustang/

70 Fastback





Chassis by BMR Performance

I have done some more cutting, so here are a few more pictures. I cut the floor pans away from the rockers and cut right in front of the door posts across the firewall. The body will need some more cleaning up around the rockers, lower part of the windshield area, and the inside of the quarters to allow for the larger wheel tubs.

Wow Bill, you've been busy! This weekend Chuck and I will come over and help you set the body onto the frame.

That Bill's a cuttin machine

I envy you Chuck.
Boy, does that bring back memories when I built my "69" in 1985.

How about trading my Maverick for your Mustang? I dont think you would fit in a Maverick buddy
Regards.
Al

He'd fit Al, they came out with a backseat, just take out the front and let him sit in the back

Dan he wanted my Pinto but we figured we would have to take out the back window so his head could stick up out thru it..... I know at teh 2008 Bash I sat in his car and lacked 12 or so inches just to reach the peddles..........


Randy