Bunch of Parts for Sale (DOVE block, headers, cam, rods, misc)

Been collecting a lot of stuff over the years and need to clean it out a bit. Everything is located in Richardson Tx (near Dallas). Will try to remember to post some pics later.


Brand new SCAT 6.605 H Beam rods with A2000 rod bolts. Real nice pieces still in the sealed bags - sold

Used Forged Icon pistons for 4.3 stroke 6.8 rod combo. Cut for STD and SCJ valves. .040 over. Stepped dish for pump gas and 72cc heads (~10.5:1 comp) - $350

Comp Solid Roller Cam 280XR (242/248 @.050 .657/664 lift 110LSA) with Matching Solid rollers, lightly used but look great and the rollers roll without any issue - $450

Crites 2" headers for 1970 Mustang (Probably fit other cars but I don't know for sure). They are coated and look great. I was going to try them in my 71 Torino but ended up doing a rack and pinion conversion thats in the way - $450

Hooker 1-7/8 headers for 70-71 Torino and 71-73 Mustang. A little rusty but they should clean up with a little effort - $250

Comp 8.4" 3/8 push rods - $50

Comp 3/8 Stepped guide plates for STD geometry heads - $20

Stefs Aluminum Front sump oil pan with pick up - Sold

STD bore DOVE-A block with boss bulkheads - $500

I also have a bunch of factory stuff from an 82ish and a 96 truck engines that I picked up. D3 heads, FI intake, Exhaust Manifolds and emissions stuff, truck oil pan with pickup, etc.
If you're looking for something let me know.

Would like to see pic's of the icon pistons.
Thanks..........

did you ever try the crites headers with the stock mounts? would like 2 inch tubes but want my ps still, its only about 8 bills to convert to the borgensen box which does away with the ram and hoses and opens up some room and those might work.
Thanks,
Steve

Can you pm me on the stefs pan.I'm interested.shipping would be to 92647.dan

Here's some pics I was able to grab this morning.

Driver side header


Pistons





Rods


Oil pan

ROAD RAGE wrote:Would like to see pic's of the icon pistons.
Thanks..........

Done

70429scj wrote:did you ever try the crites headers with the stock mounts? would like 2 inch tubes but want my ps still, its only about 8 bills to convert to the borgensen box which does away with the ram and hoses and opens up some room and those might work.
Thanks,
Steve

No I never tried to fit them, though my car was a manual steering car so I didn't have the power setup to work around. I posted a pic of the driver side. I think they would clear the borgeson box but I don't know for sure.

hbstang wrote:Can you pm me on the stefs pan.I'm interested.shipping would be to 92647.dan

I'll try to get some pics of it later.

Do you still have the crites header and is that your best prices

67aj wrote:Do you still have the crites header and is that your best prices

I have them. PM me an offer

location?

Can you check around and find if either of those sets of headers will fit a 1978 2wd ford truck?

Mike R wrote:location?

Richardson Tx

supervel45 wrote:Can you check around and find if either of those sets of headers will fit a 1978 2wd ford truck?

They do not. Both are for shock tower Mustang/Torino chassis

do you have a part # for the headers?

stanger68 wrote:do you have a part # for the headers?

The Hookers are 6115

I don't know what the p/n is on the Crites, though after some testing they might fit with the rack so I might keep them.

Bump

I need a picture on the Hooker 6115's.

Ok, I'll take a few pics this evening.

Here's some pics. In generally good condition but they need to be painted.

Also, at some point someone put some tack welds on the driver side joints so I had to grind them off to get them out of the car. Should clean up easy and doesn't affect the fit

Bump

I am a new member and cant PM for 7 days.

motorcraft88 wrote:I am a new member and cant PM for 7 days.

Does that mean you are interested in something here?

Do you still have the crites and hooker for sale

PM sent on the block if its still available

Do you still have header for 1970 mustang

i will take the comp pushrod plates if you still have them

No one is answering this thread. I think it's closed