BIG BLOCK FORD
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Trw 429 scj piston/pistons need 1 or a set 040 over

4 posters

Go down

Trw 429 scj piston/pistons need 1 or a set 040 over Empty Trw 429 scj piston/pistons need 1 or a set 040 over

Post  iron horse October 20th 2021, 3:00 pm

Hi looking for a used 040 over piston for my 429 scj, trw part # on top of piston is L2366F 40 , would buy a new set if anyone has , they are not making these right now , trying to get motor back together sooner than later , 1 used one would get me going also, any leads would be appreciated , thx

iron horse

Posts : 4
Join date : 2021-10-20

Back to top Go down

Trw 429 scj piston/pistons need 1 or a set 040 over Empty Re: Trw 429 scj piston/pistons need 1 or a set 040 over

Post  gt350hr October 21st 2021, 11:23 am

"If" you get into a bind , Racetec/Autotec makes a .040 flat top for the 429 P/N 1000539 uses 1/16x1/16x3/16 rings.

gt350hr

Posts : 662
Join date : 2014-08-20
Location : Anaheim , CA

Back to top Go down

Trw 429 scj piston/pistons need 1 or a set 040 over Empty Re: Trw 429 scj piston/pistons need 1 or a set 040 over

Post  iron horse October 21st 2021, 8:52 pm

Awesome , I’ll check that out , thx for the reply , nice to se people helping people out, need abit more of that these days trying to get one of the ford team Canada cars up and running after a lot of years

iron horse

Posts : 4
Join date : 2021-10-20

Back to top Go down

Trw 429 scj piston/pistons need 1 or a set 040 over Empty Re: Trw 429 scj piston/pistons need 1 or a set 040 over

Post  iron horse October 21st 2021, 11:41 pm

Can’t seem to load a pic of the car , 1970 cyclone spoiler scj radio delete, no ps or pb, 4:30 gear car, 80% orig Harry carry paint, under 80 miles on car, survivor 1 of 1

iron horse

Posts : 4
Join date : 2021-10-20

Back to top Go down

Trw 429 scj piston/pistons need 1 or a set 040 over Empty Re: Trw 429 scj piston/pistons need 1 or a set 040 over

Post  gt350hr October 22nd 2021, 11:30 am

I have seen pictures of it loaded on the trailer rig. GREAT find.

gt350hr

Posts : 662
Join date : 2014-08-20
Location : Anaheim , CA

Back to top Go down

Trw 429 scj piston/pistons need 1 or a set 040 over Empty Re: Trw 429 scj piston/pistons need 1 or a set 040 over

Post  Paul Kane October 22nd 2021, 1:05 pm

You could also re-block your short block and go with a different available piston size.  If so, then I do have available:

1) a set of 2366-030 on rods (US$200+ ship)
2) a 2366-030 balanced rotating assy (US$300 + ship).

All parts are in as-good-as-new condition.
Paul Kane
Paul Kane

Posts : 1049
Join date : 2009-09-15
Location : San Francisco Bay Area

http://www.highflowdynamics.com

Back to top Go down

Trw 429 scj piston/pistons need 1 or a set 040 over Empty Re: Trw 429 scj piston/pistons need 1 or a set 040 over

Post  wickettoby1 October 22nd 2021, 9:22 pm

Did you try google, theae match the part # you gave.

https://www.amazon.com/Sealed-Power-L2366F40-Forged-Piston/dp/B001NYHKRI

https://www.ebay.com/itm/Forged-Piston-SEALED-POWER-L2366F40-PISTONS-PINS-KEEPERS-/233540985289

wickettoby1

Posts : 352
Join date : 2016-02-02
Location : SE Michigan

Back to top Go down

Trw 429 scj piston/pistons need 1 or a set 040 over Empty Re: Trw 429 scj piston/pistons need 1 or a set 040 over

Post  iron horse October 22nd 2021, 11:14 pm

Hi thx for the replies , I’m trying not to send everything to machine shop , wait time here to get anything done is about 3-4 months up here , I have a complete 030 over motor needs to be rebuilt , same problem with machine shop, all the 040 over pistons on eBay are to be ordered and the factory aren’t scheduling any to be built, long wait either way, just trying to get it together a little quicker , again i appreciate all the replies , thx jim

iron horse

Posts : 4
Join date : 2021-10-20

Back to top Go down

Trw 429 scj piston/pistons need 1 or a set 040 over Empty Re: Trw 429 scj piston/pistons need 1 or a set 040 over

Post  wickettoby1 October 23rd 2021, 12:17 am

The amazon link is for a single .040 over piston that matches the part # you supplied.

The ebay link is for a single of the same .040 over piston.

I guess i dont understand what youre asking for

wickettoby1

Posts : 352
Join date : 2016-02-02
Location : SE Michigan

Back to top Go down

Trw 429 scj piston/pistons need 1 or a set 040 over Empty Re: Trw 429 scj piston/pistons need 1 or a set 040 over

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum