Wanted: small parts for carter AFB/ Edelbrock carbs
2 posters
Page 1 of 1
Wanted: small parts for carter AFB/ Edelbrock carbs
I need some linkage pieces for a carter AFB and a edelbrock perflubber carb.
See pics:
Can you please look through your vast piles of spare carbs and see if you have:
link rod between throttle and choke arm, driver side (need 2)
actuator rod throttle to accel pump lever, AND the "S" link from lever to accel pump rod. (driver side front)
lastly, choke rod, for automatic choke, goes between, choke lever and behind choke cylinder housing.(passenger side.)
I'll pay for them and shipping too.
trying to get them from edelbuttcrack, will cost a fortune.
and I'm rebuilding these carbs to sell at the swap meet.
thanks!!
danev2 at yahoo . com
See pics:
Can you please look through your vast piles of spare carbs and see if you have:
link rod between throttle and choke arm, driver side (need 2)
actuator rod throttle to accel pump lever, AND the "S" link from lever to accel pump rod. (driver side front)
lastly, choke rod, for automatic choke, goes between, choke lever and behind choke cylinder housing.(passenger side.)
I'll pay for them and shipping too.
trying to get them from edelbuttcrack, will cost a fortune.
and I'm rebuilding these carbs to sell at the swap meet.
thanks!!
danev2 at yahoo . com
danev2- Posts : 49
Join date : 2011-04-10
Re: Wanted: small parts for carter AFB/ Edelbrock carbs
I've got a edelbrock carb in pieces that I can send you. I think it has the parts you need. I bought it and it turned out to be a POS. Let me have your address so I can send it to you.
digger460- Posts : 84
Join date : 2009-02-18
Re: Wanted: small parts for carter AFB/ Edelbrock carbs
that is awesome!
my address:
dane valatka
30595 sw rogue lane #5407
wilsonville Or 97070
let me know what I'll owe you.. the carb will fit into a USPS medium size flat rate box.
from your avatar pic it looks like you have the same mid 60's era truck as I do. with a 460 no doubt.
mine is a 66 F250 4x4, with 460
frame and running gear is a 78f250 and body is 66.
thanks!!
dane V
my address:
dane valatka
30595 sw rogue lane #5407
wilsonville Or 97070
let me know what I'll owe you.. the carb will fit into a USPS medium size flat rate box.
from your avatar pic it looks like you have the same mid 60's era truck as I do. with a 460 no doubt.
mine is a 66 F250 4x4, with 460
frame and running gear is a 78f250 and body is 66.
thanks!!
dane V
danev2- Posts : 49
Join date : 2011-04-10
Re: Wanted: small parts for carter AFB/ Edelbrock carbs
Don't worry about paying me. Maybe next time you can help me or someone else.
My truck is a 61 Uni-Body with a rod through the block 460.
My truck is a 61 Uni-Body with a rod through the block 460.
digger460- Posts : 84
Join date : 2009-02-18
Re: Wanted: small parts for carter AFB/ Edelbrock carbs
well that is very generous of you.
Let me pay for the shipping cost at least.
stick the carb, pieces etc. in a post office med rate box and I'll send you $10.00 check or paypal it over.
thanks!!
Dane V
my truck is a bit more , er... streetable.
Let me pay for the shipping cost at least.
stick the carb, pieces etc. in a post office med rate box and I'll send you $10.00 check or paypal it over.
thanks!!
Dane V
my truck is a bit more , er... streetable.
danev2- Posts : 49
Join date : 2011-04-10
carb arrived
Well today is just a happy happy day...!!
at my door step was a battered UPS box with a nicely wrapped humpty dumpty edelbrock!!
and it's got all the pieces I need!! I'll use this carb for parts. I think it's salvagable. but later
also waiting for me was the new choke caps for edel's and carters, from quick fuel technologies.
part # 47-474 through Jegs.
I've got to say thanks!! and I really appreciate the carb.
the parts will go to a good cause.
thanks!
Dane V
at my door step was a battered UPS box with a nicely wrapped humpty dumpty edelbrock!!
and it's got all the pieces I need!! I'll use this carb for parts. I think it's salvagable. but later
also waiting for me was the new choke caps for edel's and carters, from quick fuel technologies.
part # 47-474 through Jegs.
I've got to say thanks!! and I really appreciate the carb.
the parts will go to a good cause.
thanks!
Dane V
danev2- Posts : 49
Join date : 2011-04-10
Similar topics
» Edelbrock carbs on my tunnel ram
» Wanted Edelbrock, Motorsports or TF 4150 Intake
» carbs for sale and some small block powerglide trans stuff
» Wanted Edelbrock carb
» Edelbrock heads wanted
» Wanted Edelbrock, Motorsports or TF 4150 Intake
» carbs for sale and some small block powerglide trans stuff
» Wanted Edelbrock carb
» Edelbrock heads wanted
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum