The good....the bad.....the ugly!!!!!!****Updated with Pics****
+17
John Myrick
Lem Evans
Wheelie58
TRUKPULR
Mike R
512Fairlane
res0rli9
knrclark
'65 T-BOLT
Curt
IDT-572
67460
cool40
hillbillyerv
BigDave65
jasonf
Race Ready Fabrications
21 posters
Page 3 of 3
Page 3 of 3 • 1, 2, 3
Re: The good....the bad.....the ugly!!!!!!****Updated with Pics****
richter69 wrote:no L19's if your gonna run methanol............
But...he has been told otherwise. The ARP 2000 are as good as the Scat/Eagle rods so, I do not see the point of the L19 in that case....pump gas or whatever.
Re: The good....the bad.....the ugly!!!!!!****Updated with Pics****
richter69 wrote:no L19's if your gonna run methanol............
Ill bite...why?
Race Ready Fabrications- Posts : 619
Join date : 2010-04-19
Age : 44
Location : Chandler, IN
Re: The good....the bad.....the ugly!!!!!!****Updated with Pics****
Race Ready Fabrications wrote:richter69 wrote:no L19's if your gonna run methanol............
Ill bite...why?
They don't like moisture. I ran them in methanol fueled motors for years with no problems.
Curt- Posts : 2791
Join date : 2009-02-08
Age : 62
Location : Henrietta, Texas but mostly on the road
Re: The good....the bad.....the ugly!!!!!!****Updated with Pics****
" L19 has the same advantage as ARP2000 in that a high strength is obtained at a high tempering temperature. This alloy is easily contaminated and requires special handling"
=====================================================================
From the ARP catalog.............it's very easy to obtain from a printed or online ARP catalog.
Re: The good....the bad.....the ugly!!!!!!****Updated with Pics****
Grats on the win and sorry about the engine failure. Sea ya in a few weeks
D. Sea- Posts : 2768
Join date : 2008-12-02
Age : 55
Location : Kentucky
Page 3 of 3 • 1, 2, 3
Similar topics
» The 2015 F150's are ugly....
» So it broke again....*UPDATED* 25/09/2016 WITH PICS
» Lets see some pics of new or updated projects
» Updated pics of the truck from the chassis shop
» Good weekend with good folks!
» So it broke again....*UPDATED* 25/09/2016 WITH PICS
» Lets see some pics of new or updated projects
» Updated pics of the truck from the chassis shop
» Good weekend with good folks!
Page 3 of 3
Permissions in this forum:
You cannot reply to topics in this forum