BIG BLOCK FORD
Would you like to react to this message? Create an account in a few clicks or log in to continue.

pushrod question

+3
Lem Evans
jbozzelle
racinghabbit
7 posters

Go down

pushrod question Empty pushrod question

Post  racinghabbit October 5th 2011, 5:23 pm

I just ordered a set of Manley pushrods 25865-8

Has anyone used manley pushrods and what kind of luck did you have with them??

Thanks
racinghabbit
racinghabbit

Posts : 575
Join date : 2011-07-12

Back to top Go down

pushrod question Empty Re: pushrod question

Post  jbozzelle October 6th 2011, 9:57 am

Haven't used Manley. What size are these? OD and wall thickness?

jbozzelle

Posts : 3705
Join date : 2009-08-10
Age : 50
Location : New Orleans

Back to top Go down

pushrod question Empty Re: pushrod question

Post  Lem Evans October 6th 2011, 10:07 am

jbozzelle wrote:Haven't used Manley. What size are these? OD and wall thickness?

3/8" x .080" wall x 8.650"

Lem Evans

Posts : 7445
Join date : 2008-12-03
Location : Livermore , Ky

http://bfevansraceparts.com

Back to top Go down

pushrod question Empty Re: pushrod question

Post  racinghabbit October 6th 2011, 11:42 am

lem have you ever worked with them ?
racinghabbit
racinghabbit

Posts : 575
Join date : 2011-07-12

Back to top Go down

pushrod question Empty Re: pushrod question

Post  Lem Evans October 6th 2011, 2:06 pm

I use/sell the Trend stuff........Manley should be good.

Lem Evans

Posts : 7445
Join date : 2008-12-03
Location : Livermore , Ky

http://bfevansraceparts.com

Back to top Go down

pushrod question Empty Manley pushrods

Post  manofmerc October 9th 2011, 6:40 am

I used a set of 5/16 in my 460 several years ago no problems at all .I like manley they list there pushrods in 0.50 increments .An 8.500 worked for me .I have a set in my 428 cyclone also .They are good to go Cool

manofmerc
BBF CONTRIBUTOR
BBF CONTRIBUTOR

Posts : 565
Join date : 2011-03-31

Back to top Go down

pushrod question Empty Re: pushrod question

Post  bbf-falcon October 9th 2011, 7:27 am

I used them in all my engines years ago w/o problems

bbf-falcon

Posts : 8995
Join date : 2008-12-03
Location : Jackson, Ohio

Back to top Go down

pushrod question Empty Re: pushrod question

Post  dfree383 October 9th 2011, 8:35 am

I've used a couple of sets over the years, no problems here.
dfree383
dfree383
BBF CONTRIBUTOR
BBF CONTRIBUTOR

Posts : 14851
Join date : 2009-07-09
Location : Home Wif Da Wife.....

Back to top Go down

pushrod question Empty Re: pushrod question

Post  LivermoreDave October 9th 2011, 9:04 am

Just a thought of course! If one ask them self, or has pursued information from the manufacture or a representative of the manufacture of which one's self chooses a particular part(s) and it has been recommended for their application, why would their be concern as to the part(s) integrity ?

Dave.

LivermoreDave

Posts : 972
Join date : 2009-09-27
Location : North of the Equator.

Back to top Go down

pushrod question Empty Re: pushrod question

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum