truck spindles needed asap
+2
olschoolsteel
bb429power
6 posters
Page 1 of 1
truck spindles needed asap
I need a set of truck spindles with rear mounted tie rods, setup for disk brakes. I think anything from 67 up to 82 will work, let me know if you have anything.
bb429power- Posts : 3129
Join date : 2010-02-13
Age : 30
Location : Michigan
Re: truck spindles needed asap
I will be parting/scraping out a 68 f250 in a week or so. IIRC it should have the dual piston disc brake on it. You still in the market?
olschoolsteel- Posts : 34
Join date : 2011-07-26
Age : 51
Location : North Ut
bb429power- Posts : 3129
Join date : 2010-02-13
Age : 30
Location : Michigan
Re: truck spindles needed asap
Bump-still no luck finding anything. Checked all around
bb429power- Posts : 3129
Join date : 2010-02-13
Age : 30
Location : Michigan
front parts
I have a 68' with power brakes it that what u are looking to do?
rmurphy- Posts : 20
Join date : 2012-06-17
Age : 59
Location : prairieville, La.
Re: truck spindles needed asap
He needs spindles and disc I think.
bbf-falcon- Posts : 8995
Join date : 2008-12-03
Location : Jackson, Ohio
brakes
I have a set from a 69' f-100 spindles, rotors, calipers, PM me will talk price.
rmurphy- Posts : 20
Join date : 2012-06-17
Age : 59
Location : prairieville, La.
Re: truck spindles needed asap
pm sent, and yes I need spindles to work with disc brakes
bb429power- Posts : 3129
Join date : 2010-02-13
Age : 30
Location : Michigan
Re: truck spindles needed asap
The search continues
bb429power- Posts : 3129
Join date : 2010-02-13
Age : 30
Location : Michigan
Re: truck spindles needed asap
I have a 74 F350 chassis out back with disc brakes on it if they are not too big. I don't know if they would work on a lighter duty pickup..
wdfp- Posts : 3
Join date : 2010-11-10
Location : st anthony Idaho
Re: truck spindles needed asap
wdfp wrote: I have a 74 F350 chassis out back with disc brakes on it if they are not too big. I don't know if they would work on a lighter duty pickup..
If they are the ones with the calipers mounted in front then they wont work. I looked at a pair yesterday and the guy was telling me they probably wont clear the wheels.
bb429power- Posts : 3129
Join date : 2010-02-13
Age : 30
Location : Michigan
Re: truck spindles needed asap
Justin have you look at the boneyards in lima ,there is also a yard in delphos or van wert.
dave d- Posts : 809
Join date : 2009-12-22
Age : 65
Location : nwohio
Re: truck spindles needed asap
No I haven't. I am newer to the NW Ohio area so I don't know where any are. I've gone through the local ones in Michigan though and called around.
Do you know the names of any in the Lima area?
Do you know the names of any in the Lima area?
bb429power- Posts : 3129
Join date : 2010-02-13
Age : 30
Location : Michigan
Re: truck spindles needed asap
army's -- b&b truck&auto parts sidney,oh ----kenny's---national auto and truck salvage wapak,oh army's and kenny's are in lima b&b 957-492-7330 national 419-645-4108 see if one of this will have what you need THERE is more
dave d- Posts : 809
Join date : 2009-12-22
Age : 65
Location : nwohio
Re: truck spindles needed asap
dave d wrote:army's -- b&b truck&auto parts sidney,oh ----kenny's---national auto and truck salvage wapak,oh army's and kenny's are in lima b&b 957-492-7330 national 419-645-4108 see if one of this will have what you need THERE is more
Thank you for the good info I'm looking them up now
bb429power- Posts : 3129
Join date : 2010-02-13
Age : 30
Location : Michigan
Re: truck spindles needed asap
Justin did ever find the spindles you where looking for
dave d- Posts : 809
Join date : 2009-12-22
Age : 65
Location : nwohio
Re: truck spindles needed asap
Justin,you need to go to the super swap Sat. in Columbus. There will be some there.
bbf-falcon- Posts : 8995
Join date : 2008-12-03
Location : Jackson, Ohio
Re: truck spindles needed asap
I've always wanted to go to that swap meet, I've never gone though. I heard its the bee's knee's
bb429power- Posts : 3129
Join date : 2010-02-13
Age : 30
Location : Michigan
Similar topics
» PART NEEDED ASAP CAM THRUST PLATE ROLLER
» 4.500 CRANK NEEDED ASAP
» Cap adapter needed ASAP
» Needed ASAP SCJ Heads
» 2 Head studs (longer ones) needed asap
» 4.500 CRANK NEEDED ASAP
» Cap adapter needed ASAP
» Needed ASAP SCJ Heads
» 2 Head studs (longer ones) needed asap
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum