New horse for the corral.

Just did a little trading tonight...............

I will add more pictures in a bit.

pile of shit

I just like this last one..............

richter69 wrote:pile of shit

May be there TURD LICKER............ but it's my pile o poo

and just what are you gona do with that?

Hell X275 baby we gonna run your engine at the big races

IDT-572 wrote:Hell X275 baby we gonna run your engine at the big races

good plan cuz i sure aint gona have a car to put it in.....

What is under your car in the last picture? The headers sit that low? or is that something else?

cool40 wrote:

IDT-572 wrote:Hell X275 baby we gonna run your engine at the big races

good plan cuz i sure aint gona have a car to put it in.....

O yea, I know you, it will be together.

The color is red buy it looks orange in the pictures.

psfracer wrote:What is under your car in the last picture? The headers sit that low? or is that something else?

Yes it was my old headers.............. they were loooooow

IDT-572 wrote:Hell X275 baby we gonna run your engine at the big races

Blake,

The real question is, when are you ever to going to build your big engine? You know, the one I got the titanium valves for several years ago.

Uncle Charlie

I like it Blake,looks like a light duty rear housing though.

c.evans wrote:

IDT-572 wrote:Hell X275 baby we gonna run your engine at the big races

Blake,

The real question is, when are you ever to going to build your big engine? You know, the one I got the titanium valves for several years ago.

Uncle Charlie

Doing to many engines Charlie, Just haven't had time to get on it.

bbf-falcon wrote:I like it Blake,looks like a light duty rear housing though.

It is the small 9 inch, but I have a back brace for it. More than likely it will be a small block car.

I ran a small one behind my 557 down to 5.60's, with no brace and when I took it out it had twisted the right hand tube enough to oblong the vent hole on top.

looks just like my car the way it sits lol ....... what ya thinking on doing with it in detail ?

looks nice and clean

good looking project

bruno wrote:good looking project

Thanks.............

5pointslow wrote:looks just like my car the way it sits lol ....... what ya thinking on doing with it in detail ?

looks nice and clean

I have a 8.2 inch deck deal to go in it or a 414 with aluminum Clevland heads. It has all the parts plus an extra set of doors.

I also have almost everything to put an IDT A+ headed 605 together and go after Bruno in the X275 class

I will get it running and hooking then put it up for sale. It has good Moser axles, 5/8ths studs and flange nuts, Ladder bars and coil overs, tubular K member, Tubular trans mount for a glide, new front and rear wheels and tires, 28x10.5 ET Drags. Fire wall smoothed and plate welded in for manual brakes, bottom radiator support cut off and flat mount welded in. Two sets of gear and one spool and carrier.

Nice cage out to the shock towers. X braced from rocker panel to the 2x3 frame tie and to the ladder bar cross member.

Guy got this far and got divorced, car had to go................ Body is dent free and straight no rust.

I think you should put that engine you picked up out here, in that ride. It would be one of a kind.

IDT-572 wrote:

5pointslow wrote:looks just like my car the way it sits lol ....... what ya thinking on doing with it in detail ?

looks nice and clean

I have a 8.2 inch deck deal to go in it or a 414 with aluminum Clevland heads. It has all the parts plus an extra set of doors.

I also have almost everything to put an IDT A+ headed 605 together and go after Bruno in the X275 class

I will get it running and hooking then put it up for sale. It has good Moser axles, 5/8ths studs and flange nuts, Ladder bars and coil overs, tubular K member, Tubular trans mount for a glide, new front and rear wheels and tires, 28x10.5 ET Drags. Fire wall smoothed and plate welded in for manual brakes, bottom radiator support cut off and flat mount welded in. Two sets of gear and one spool and carrier.

Nice cage out to the shock towers. X braced from rocker panel to the 2x3 frame tie and to the ladder bar cross member.

Guy got this far and got divorced, car had to go................ Body is dent free and straight no rust.

That's wesley future mustang!!

D's557BBF wrote:

IDT-572 wrote:

5pointslow wrote:looks just like my car the way it sits lol ....... what ya thinking on doing with it in detail ?

looks nice and clean

I have a 8.2 inch deck deal to go in it or a 414 with aluminum Clevland heads. It has all the parts plus an extra set of doors.

I also have almost everything to put an IDT A+ headed 605 together and go after Bruno in the X275 class

I will get it running and hooking then put it up for sale. It has good Moser axles, 5/8ths studs and flange nuts, Ladder bars and coil overs, tubular K member, Tubular trans mount for a glide, new front and rear wheels and tires, 28x10.5 ET Drags. Fire wall smoothed and plate welded in for manual brakes, bottom radiator support cut off and flat mount welded in. Two sets of gear and one spool and carrier.

Nice cage out to the shock towers. X braced from rocker panel to the 2x3 frame tie and to the ladder bar cross member.

Guy got this far and got divorced, car had to go................ Body is dent free and straight no rust.

That's wesley future mustang!!

It sure could be.............

schmitty wrote:I think you should put that engine you picked up out here, in that ride. It would be one of a kind.

Probably need to get some different spring for the front...............

Nice looking set up.Make a grudge out of it and keep it!

dr's wife racing wrote:Nice looking set up.Make a grudge out of it and keep it!

Thanks Ward

Looking good Blake, did you get what I sent you?