tolit injecters

I am picking up a Ron's Tolit to put on my 552 what is the best angle to set the injecters at in a Victor intake.

90 degree.....check KillerRons site, Monroe has a decent article on there about drilling and tapping a manifold

I hope this is not mine

the Coug wrote:I hope this is not mine

You'd just be helping out another brother without even knowing it!!

56Tbird wrote:

the Coug wrote:I hope this is not mine

You'd just be helping out another brother without even knowing it!!

been there done that lost matching carb in the process no more

the Coug wrote:I hope this is not mine

Nop but if you would like to buy the APD 1050 you can $550 that is about $200 less than I have in it.

I will sell you the mayching carb to it for what I have in them....

the Coug wrote:I will sell you the mayching carb to it for what I have in them....

Nop I don't need it I am going to the tolit setup no need for carbs anymore. But if you want the 1050 that matches yours you will be the 1st in the line that can get after I get the tolit Saturday morning if you don't want it I will be listing it for sale after I get the tolit.

You will have a learning experience with the conversion to a Flying Toilet or any other mechanical fuel injection.
Please plan on a good EGT gauge before you attempt to tune it.
With no EGT, you will chase your tail and spend lots of time and money.
I have been "on the Toilet" for many years and can help if you need it.
Have fun.
Keith Fulp

This is the one I purchased, just haven't installed the headend unit yet. The probes are in the headers and the wire is ran

http://computech.com/index.php?main_page=product_info&cPath=3&products_id=14

John,
That is a great system.
Keith

the Coug wrote:I hope this is not mine

yours still sitting in a box on a dusty shelf.

Wheelie58 wrote:You will have a learning experience with the conversion to a Flying Toilet or any other mechanical fuel injection.
Please plan on a good EGT gauge before you attempt to tune it.
With no EGT, you will chase your tail and spend lots of time and money.
I have been "on the Toilet" for many years and can help if you need it.
Have fun.
Keith Fulp

Yes I will be ordering a EGT guage along with a gas primer to crank it on

Wheelie58 wrote:
I have been "on the Toilet" for many years and can help if you need it.
Have fun.
Keith Fulp

Keith,
Something don't sound right about this, it sounds to me that if you've been there that long, it is you that needs the help

More fiber .....

kieth i will be getting with you when i get everything installed and running on some tuning help

richter69 wrote:

the Coug wrote:I hope this is not mine

yours still sitting in a box on a dusty shelf.

What will you take for it Fabio???