6.50 street car
5 posters
Page 1 of 1
6.50 street car
I have a 87 hatch back fox body. Color is white it is in orig. paint except hood .. Glass 6 inch cal hood. Car is un cut . All orig. glass through out. Manual windows. Still has door bars. Has fuel cell with nice legal fire enclosure. Manual rack. 9 inch rear nodular case 4.11 gear.. Sits on true stock suspension with only after market bars . 400 gph fuel pump. C 6 with a trans brake. It has a BBF iron heads ?? sombody ground every ## on them off. I took the carb off they look like CJ ports but I'm not sure. It has a victor with a dommy. SFI Balancer. It has hardened push rods and earson roller rockers.MSD dizzy. 6 AL and timing retards.Line lock. Motor looks clean,no somke good oil pressure. FOX BODY CONVERSION HEADDERS X PIPE AND 1 CHAMBER FLOW MASTERS. Every thing works off key. It does have a master cut off. It has a 8 point chrome molly cage . orig carpet, two nice alum racing seats with covers. Int is red. I also have orig red console and front seat's that are pretty good for age . All lights and turn signals work.
It has a nos big shot it is drivable on the street . RUNS 7.00'S ON MOTOR AND 6.50,S ON SPRAY WITH A 50 AND 52 JET 28 deg timing.. Runs on pump gas on street and I ran 100 oct at the track. Body is sreight and rust free except for a small place on the hatch which shows a couple of bubbles.
Price 6500 as it sits or 7000 with k member/tublar arms and coil over conversion for the front.
I have a clean title for this car. Photos on request will try to get some up here later.Might be interested in trades just have to try me.
It has a nos big shot it is drivable on the street . RUNS 7.00'S ON MOTOR AND 6.50,S ON SPRAY WITH A 50 AND 52 JET 28 deg timing.. Runs on pump gas on street and I ran 100 oct at the track. Body is sreight and rust free except for a small place on the hatch which shows a couple of bubbles.
Price 6500 as it sits or 7000 with k member/tublar arms and coil over conversion for the front.
I have a clean title for this car. Photos on request will try to get some up here later.Might be interested in trades just have to try me.
dr's wife racing- BBF CONTRIBUTOR
- Posts : 1655
Join date : 2009-08-20
Re: 6.50 street car
It also has sub frame connectors. It is five lug converted on both ends it is sitting on drag lites with 28/10.5's in back and front runners. It hooks good and runs streight. It would prob run some 30's with addition of a anti roll bar as it bottoms out the right rear susp if you push it, even on foot brake.
dr's wife racing- BBF CONTRIBUTOR
- Posts : 1655
Join date : 2009-08-20
Re: 6.50 street car
Sounds like a car to take to hot rods dragweek... wish I had the funds and space for this... seems like a lot of car for the money... free bump for ya..
bluef100fe- Posts : 379
Join date : 2009-09-09
Age : 40
Location : Pulaski, Wisconsin
Re: 6.50 street car
Somebody must have intrest in a nice street strip car.
dr's wife racing- BBF CONTRIBUTOR
- Posts : 1655
Join date : 2009-08-20
Photo added
Here's a picture...have more on my phone.
dr's wife racing- BBF CONTRIBUTOR
- Posts : 1655
Join date : 2009-08-20
Re: 6.50 street car
Located in Fayette Al about 45 miles north of Tuscaloosa .
dr's wife racing- BBF CONTRIBUTOR
- Posts : 1655
Join date : 2009-08-20
Re: 6.50 street car
This would look nice wrapped up under someone's tree
dr's wife racing- BBF CONTRIBUTOR
- Posts : 1655
Join date : 2009-08-20
Re: 6.50 street car
i live in Montana....any chance on you working something out for a 2000 Harley Davidson ultra classic?? I know I am a ways away. just curious
FORDIN- Posts : 28
Join date : 2010-12-26
Age : 54
Location : HAMILTON,MT
Re: 6.50 street car
My wife told me I can't have a motorcycle or a air plane. No kidding. Thanks for the offer Im just not into bikes
dr's wife racing- BBF CONTRIBUTOR
- Posts : 1655
Join date : 2009-08-20
Re: 6.50 street car
Deal pending on car
dr's wife racing- BBF CONTRIBUTOR
- Posts : 1655
Join date : 2009-08-20
Re: 6.50 street car
Deal pending on car
dr's wife racing- BBF CONTRIBUTOR
- Posts : 1655
Join date : 2009-08-20
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum