Garage sale.Converters,headers,suspension parts etc.

70FB wrote:Headers,oil pan and pump are still for sale as a kit.

I still have the 2 converters, leaf springs floaters, C-6 trans still for sale.

Headers,pan and pump sold.

tell me a little about the TCI converter....is it still for sale,whats the stall,how used is it,and will you ship it?
                                                                                                                            thanks,Charles

Can you tell me about the hughes?

63Galaxie2 wrote:Can you tell me about the hughes?

I only had this in the car for a short period. It had a 429 with about 425hp in front of it. It may have 30 miles on it if that. I went to the current engine and a powerglide since then.

Here is what Jeg's lists as details on it.

Hughes Performance Street-Strip 3500 Stall Series Torque Converters are made for weekend racing and high performance street use. Each converter is brazed and features a strengthened sprag, special cut stator, and full needle bearings front and rear. Made in the U.S.A.

Features:
3500 Stall RPM
Silicon-brazed to increase strength
Front and rear needle bearings to ensure reliability
Premium sprag and specially-cut stator
Excellent torque converters for high-performance street use and weekend racing
Not for use in transbrake applications
Note: Stall speeds are approximate and will vary depending upon application.

63Galaxie2 wrote:Can you tell me about the hughes?

Here are the details...

Hughes Performance#512-35-35
Street/Strip Torque Converter
1966-84 Ford C6 360/390/428/429 V8
10"
3500 Stall
31-Spline
1.848" Pilot

diehardfordtruck wrote:tell me a little about the TCI converter....is it still for sale,whats the stall,how used is it,and will you ship it?
                                                                                                                            thanks,Charles

It hasn't been used much at all. Yes,I can ship it. Just doublecheck your crank pilot size.

TCI#890-441100
Breakaway Torque Converter
Ford
1966-84 C6
332, 360, 390, 406, 427, 428 cid
1.850'' Crank Pilot

The first step into serious high performance, the Breakaway is a great torque converter for moderately modified street machines and weekend racers also used as daily drivers. It provides approximately 2400 to 2600 RPM flash stall without negatively affecting part-throttle driving. Designed for efficiency at highway cruising speeds and to launch hard at wide-open throttle.

Features
Furnace-brazed fins
Needle bearings
Hardened, pre-ground pump hub
Computer Balanced
Installed Hardware Included
Benefits
Harder launches
Quicker acceleration
Improved low-end power
Bolt-in (no modifications required)
1000+ RPM increase in stall over stock

70FB wrote:

63Galaxie2 wrote:Can you tell me about the hughes?

I only had this in the car for a short period. It had a 429 with about 425hp in front of it. It may have 30 miles on it if that. I went to the current engine and a powerglide since then.

Here is what Jeg's lists as details on it.

Hughes Performance Street-Strip 3500 Stall Series Torque Converters are made for weekend racing and high performance street use. Each converter is brazed and features a strengthened sprag, special cut stator, and full needle bearings front and rear. Made in the U.S.A.

Features:
3500 Stall RPM
Silicon-brazed to increase strength
Front and rear needle bearings to ensure reliability
Premium sprag and specially-cut stator
Excellent torque converters for high-performance street use and weekend racing
Not for use in transbrake applications
Note: Stall speeds are approximate and will vary depending upon application.

How much to ship to Azle Tx 76020?

I'm interested in this the TCI,the pilot is the right size also...I can send you a pm with my number or how ever you want to do it. Just let me know...
                                                                                                                      Thanks,Charles

diehardfordtruck wrote:I'm interested in this the TCI,the pilot is the right size also...I can send you a pm with my number or how ever you want to do it. Just let me know...
                                                                                                                      Thanks,Charles

Ok send me your zip code and go ahead and check shipping on both converters tomorrow. I may be able to weigh these tonight.

Ellijay GA 30540
Thanks Charles

63Galaxie2 wrote:

70FB wrote:

63Galaxie2 wrote:Can you tell me about the hughes?

I only had this in the car for a short period. It had a 429 with about 425hp in front of it. It may have 30 miles on it if that. I went to the current engine and a powerglide since then.

Here is what Jeg's lists as details on it.

Hughes Performance Street-Strip 3500 Stall Series Torque Converters are made for weekend racing and high performance street use. Each converter is brazed and features a strengthened sprag, special cut stator, and full needle bearings front and rear. Made in the U.S.A.

Features:
3500 Stall RPM
Silicon-brazed to increase strength
Front and rear needle bearings to ensure reliability
Premium sprag and specially-cut stator
Excellent torque converters for high-performance street use and weekend racing
Not for use in transbrake applications
Note: Stall speeds are approximate and will vary depending upon application.

How much to ship to Azle Tx 76020?

$41 Their are two other people interested in this converter.

diehardfordtruck wrote:Ellijay GA 30540
Thanks Charles

Shipping would have been $38. This converter is sold pending payment.

Check your PM

70FB wrote:

diehardfordtruck wrote:Ellijay GA 30540
Thanks Charles

Shipping would have been $38. This converter is sold pending payment.

let me know if it it don't sale.....thanks

Hughes converter is sold.

70FB wrote:Hughes converter is sold.

TCI ?

are the heads for beer gone?

Wireless1 wrote:are the heads for beer gone?

Yes sir. Heads are gone.

[quote="diehardfordtruck"]

70FB wrote:Hughes converter is sold.

TCI ?[/quote
Pending payment so yes I could pretty much say it's gone.

Do you still have the headers and pan? PayPal ready!

Text me or pm me please.

Andy
616-325-5571

Pm sent.

AndyLeslie wrote:Do you still have the headers and pan? PayPal ready!

Text me or pm me please.

Andy
616-325-5571

Pm sent.

Never mind, overlooked the post where they sold...