414 S.B. Ford Windsor EMC engine

Complete engine less carburetor; as is, ready to run.  Finished 2nd in the 2015 Engine Masters Contest

NEWEST EDIT:
Engine was reconfigured for last year's 2017 Engine Masters Competition with ported single-plane manifold, Ford Racing valve covers and solid lifter camshaft with crankshaft driven reverse rotation water pump
600.0 horsepower @ 6,400 - 6,500 & 6,600 RPM.
551.7 lb/ft torque @ 4,900 & 5,000 RPM.

$7,500.00

Price?

specs?

Saw this article on Hot Rods website

http://www.hotrod.com/events/1510-ford-windsor-takes-2-spot-in-the-spec-small-block-class-at-2015-engine-masters-challenge/

It ain't a Cleveland that's for sure.

Larry Williams wrote:specs?

Be more specific as to which ones.

Ported Edelbrock headed, 10.8/1 compression street/strip engine, ported Victor Jr., with custom solid flat tappet camshaft

Stout street engine no doubt. I would like to see what you could do with a Cleveland and a good set of aftermarket heads. 100 more HP? Buddy in NC has a stroker on pump gas pushing 660-670.

Bump for a price

Randy...

It might help if you put a $$$ on this piece...just saying..

rmcomprandy wrote:

Larry Williams wrote:specs?

All the specs will be in the Hot Rod magazine coming out next month.
It is 11/1 compression with hydraulic flat tappet lifters and REALLY a street engine.

Randy,good luck on selling the Engine i was going to ask you when the Hot Rod magazine Engine Masters issue was coming out now i don't have to,Thanks!!!

QtrWarrior wrote:Randy...

It might help if you put a $$$ on this piece...just saying..

Somewhere around $7,500.00 / $8,000.00 range but, that can be negotiable depending upon the circumstances.

I got the newest Hot Rod magazine yesterday and I am really disappointed in the EMC coverage.
They took the lazy way out and simply printed everything which was available to read 3 months ago on-line.

Seems like a good deal. Nice fat power band!

T T T ...

I had a guy offer me $7,600.00 over the phone and I took it, IF he came to pick it up.

This past weekend he drove here and expected to go away with it after he then offered me $6,500.00 cash as a final offer. Pretty presumptuous because he had no more money with him and was pissed that he had to now drive the 180 some miles back home, as if this was in some way my fault.

I told him "Bye-Bye" ... I'll take it apart first and sell the parts separately before I stoop to about giving it away.

rmcomprandy wrote:I had a guy offer me $7,600.00 over the phone and I took it, IF he came to pick it up.

This past weekend he drove here and expected to go away with it after he then offered me $6,500.00 cash as a final offer.  Pretty presumptuous because he had no more money with him and was pissed that he had to now drive the 180 some miles back home, as if this was in some way my fault.  

I told him "Bye-Bye" ... I'll take it apart first and sell the parts separately before I stoop to about giving it away.

Youre too polite..... I would have said more than bye bye....

That's messed up, I would have run him off to. Can't figure out what's wrong with people these days. Makes you almost not want to sell anything anymore or even try to buy stuff sometimes.

I know how you feel. A while back I was selling a Harley, this guy came by to look at it and since I was having a beer I offered him one, which he took. After looking it over, and taking it for a ride he said it had a loose top end and offered me an insultingly low amount (this bike was no junker, lots of new chrome, candy paint and a fresh 86" stroker). I told him to get lost and took my beer away from him

rmcomprandy wrote:I had a guy offer me $7,600.00 over the phone and I took it, IF he came to pick it up.

This past weekend he drove here and expected to go away with it after he then offered me $6,500.00 cash as a final offer.  Pretty presumptuous because he had no more money with him and was pissed that he had to now drive the 180 some miles back home, as if this was in some way my fault.  

I told him "Bye-Bye" ... I'll take it apart first and sell the parts separately before I stoop to about giving it away.

Way to hold your ground,he offered you $7,600.00 on the phone should have brought $7,600.00!!!!Money talks bull **** walks or in his case drives back home!!!

Mike R wrote:I know how you feel. A while back I was selling a Harley, this guy came by to look at it and since I was having a beer I offered him one, which he took. After looking it over, and taking it for a ride he said it had a loose top end and offered me an insultingly low amount (this bike was no junker, lots of new chrome, candy paint and a fresh 86" stroker). I told him to get lost and took my beer away from him

That's great i love it You took the beer away from him

Way to go Randy! These folks have been watching TOO much TV!

I have been asked this over the phone numerous times so, YES, I have changed the intake to a ported Victor Jr. and the camshaft and valve train to a solid.

rmcomprandy wrote:I had a guy offer me $7,600.00 over the phone and I took it, IF he came to pick it up.

This past weekend he drove here and expected to go away with it after he then offered me $6,500.00 cash as a final offer.  Pretty presumptuous because he had no more money with him and was pissed that he had to now drive the 180 some miles back home, as if this was in some way my fault.  

I told him "Bye-Bye" ... I'll take it apart first and sell the parts separately before I stoop to about giving it away.

I had a guy drive from Mississippi to NC to offer me 1k less than I told him my absolute bottom dollar for my old '69 Mustang chassis car. Sent him home with an empty trailer.

Still have it for sale after this year's competition.

This sale is now on hold as it will again be for sale after the coming Engine Masters Challenge.
It has been entered this year as an alternate and may need to be run in that contest again this year.

EDIT:
It did run again and the numbers are posted.

ttt