BIG BLOCK FORD
Would you like to react to this message? Create an account in a few clicks or log in to continue.

490 short block

Go down

490 short block Empty 490 short block

Post  Gary Varney March 27th 2016, 8:41 pm

Short block that has been wrapped up under the bench for a few years. D1ve block, filled, eagle rods, Arias pistons with .100 dome, 460 factory cank stroked .110. Pistons work with scj ,Blue Thunder heads. I ran this combo for 21 years with 0 failures. Between 450-500 runs before freshen up and bearings always looked very good. I also have around 10 extra pistons and a stroked crank that I aquired from a friend. Some of the spare pistons are new some used. I also have a stock set of rods (440 Mopar rods) that will work with the combo. Short block had around 80 1/8 mile runs when I pulled it out. Should have a lot of life left in it. Car went best of 8.61 at 2450 lbs with this combo. I can have it at the Spring swap in Columbus if anyone is interested. Take $1250 for everything.

Gary Varney

Posts : 102
Join date : 2009-09-07
Location : Etna, Ohio

Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum