Shopping for stainless steel rocker arms.

I'm building a 429 with spring pressure of 130 /330 and want a stainless roller rocker.

Any suggestions

A weekend driver in a f250.

Bob
Tucson

Comp Cams or Crower 1.73

Ford BB 460 1.73 7/16" Stainless Steel Roller Rocker Arms around $150 -250 on Ebay. Any good for this mild application? My springs are 130/330lbs

My 429 is .030 over flat top CJ type Sealed power Forged pistons with 9.8:1 compression. A Bullet 262 cam for torque in a 75 F250 truck.

Anyone running these with any luck.

How do Scorpions compare. I have a use set?

Bob
Tucson

I wouldn't use them. Chinese junk IMO

Better off with scorpion or harlin sharp aluminum ones made in USA if that's your budget

PRW brand have served me well in the solid and hyd flat tappet deals.

Probably made in Chinee but the work well on the lower pressure apps.

Crower....................get a Chevrolet if you're going to be cheap

I'm frugal and my crane golds have been working just fine for 30 years

If you are frugal and want a sufficient product, as IDT-572 suggested, use the PRW rockers.