Blocking the intake exhaust crossover.
2 posters
Page 1 of 1
Blocking the intake exhaust crossover.
I'm about to block off the intake crossover on my 429 new build.
I got some .030 stainless sheet to cut to fit.
Any suggestions on how to fit or anything else.
I'm in Arizona.
Thanx,
Bob
Tucson
I got some .030 stainless sheet to cut to fit.
Any suggestions on how to fit or anything else.
I'm in Arizona.
Thanx,
Bob
Tucson
75truck- Posts : 102
Join date : 2015-03-26
Re: Blocking the intake exhaust crossover.
Just make sure that it does not protrude beyond the sealing surface (or is too thick), or you will not get the intake to seal right there.
BBFTorino- Posts : 999
Join date : 2015-12-31
Similar topics
» Can I block off DOOE head exhaust crossover port w/o removing intake manifold?
» Blocking heat riser crossover
» 429cj exhaust crossover runner for Q-Jet divorced choke
» 429 - 460 Heads and Fox Mustang Swap stuff
» 460 Water Pump Crossover Tube that goes in the Intake to the Water Pump?
» Blocking heat riser crossover
» 429cj exhaust crossover runner for Q-Jet divorced choke
» 429 - 460 Heads and Fox Mustang Swap stuff
» 460 Water Pump Crossover Tube that goes in the Intake to the Water Pump?
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum