Aftermarket 9” Case
+2
Gregaust
wickettoby1
6 posters
Page 1 of 1
Aftermarket 9” Case
Which aftermarket nodular 9” cases are you guys using?
Strange
Currie
Moser
Yukon
Dutchman
Summit House Brand
Speedway House Brand
???
Strange
Currie
Moser
Yukon
Dutchman
Summit House Brand
Speedway House Brand
???
wickettoby1- Posts : 352
Join date : 2016-02-02
Location : SE Michigan
Re: Aftermarket 9” Case
Used a few 9+ Race cases , by Currie I believe have been great
Gregaust- Posts : 625
Join date : 2009-08-09
Re: Aftermarket 9” Case
I use the 3.25" strange but the next one i will probably go with aluminum
norm- Posts : 260
Join date : 2009-08-06
Location : michigan
Re: Aftermarket 9” Case
Strange and MW here
dfree383- BBF CONTRIBUTOR
- Posts : 14849
Join date : 2009-07-09
Location : Home Wif Da Wife.....
Re: Aftermarket 9” Case
Thanks for the replies guys
The guys that have used a Strange case, was it the S series or a Pro case?
The guys that have used a Strange case, was it the S series or a Pro case?
wickettoby1- Posts : 352
Join date : 2016-02-02
Location : SE Michigan
Re: Aftermarket 9” Case
Pro...... S stuff is light duty
dfree383- BBF CONTRIBUTOR
- Posts : 14849
Join date : 2009-07-09
Location : Home Wif Da Wife.....
Re: Aftermarket 9” Case
dfree383 wrote:Pro...... S stuff is light duty
So the S series is the Ladies Home Journal version???
wickettoby1- Posts : 352
Join date : 2016-02-02
Location : SE Michigan
Re: Aftermarket 9” Case
Pro here also.
No sense messing around here to save $100 in my opinion. If the cheaper one breaks the money you saved will be long gone in the repair because of all the other stuff junked from the case breaking.
No sense messing around here to save $100 in my opinion. If the cheaper one breaks the money you saved will be long gone in the repair because of all the other stuff junked from the case breaking.
norm- Posts : 260
Join date : 2009-08-06
Location : michigan
Mark Miller likes this post
Re: Aftermarket 9” Case
I have a yukon. No problems at all with it.. According to quick performance they are thicker in certain areas than the strange.
stanger68- Posts : 500
Join date : 2015-12-05
Location : Birmingham, Al
Re: Aftermarket 9” Case
I’ve actually been looking at the Yukons and my past dealings with QP have been awesome.
wickettoby1- Posts : 352
Join date : 2016-02-02
Location : SE Michigan
Re: Aftermarket 9” Case
Mark Williams case with moly tubes. Can fit 9.5” gears
Goldylox_fairlane- Posts : 54
Join date : 2019-11-30
Re: Aftermarket 9” Case
wickettoby1 wrote:I’ve actually been looking at the Yukons and my past dealings with QP have been awesome.
Yes same here. Awesome service and pricing. I ordered a chunk and axles. They shipped it all in 2-3 days after I placed the order as promised. Can't beat that. I'm sure the strange unit would have a higher resale value but for a bracket car like mine thats the least of my concerns.
stanger68- Posts : 500
Join date : 2015-12-05
Location : Birmingham, Al
Re: Aftermarket 9” Case
wickettoby1 wrote:dfree383 wrote:Pro...... S stuff is light duty
So the S series is the Ladies Home Journal version???
It’s more of a Hp street case than a high load drag case, not bad stuff just not as heavy.
dfree383- BBF CONTRIBUTOR
- Posts : 14849
Join date : 2009-07-09
Location : Home Wif Da Wife.....
Similar topics
» Wanted Ford 9" aftermarket case for 3.250 bearing and pinion support/3:91 gears
» 8.8 aftermarket axles
» aftermarket 460 block
» Aftermarket 1.76 gears
» aftermarket 1.80 glide
» 8.8 aftermarket axles
» aftermarket 460 block
» Aftermarket 1.76 gears
» aftermarket 1.80 glide
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum