460ford projects
+9
Tommyj466
paulie9fingers
deerhunter3814
F-150
KY JELLY
capri-sun
richter69
56Tbird
bruno
13 posters
Page 1 of 2
Page 1 of 2 • 1, 2
Re: 460ford projects
D's busy today Mr. Bruno, please leave him alone to figure out a problem at Ford Motor Company.
56Tbird- BBF CONTRIBUTOR
- Posts : 5260
Join date : 2008-12-02
Age : 65
Location : Hawesville,Ky.
Re: 460ford projects
So how's your motor coming along Mr.Bruno?
56Tbird- BBF CONTRIBUTOR
- Posts : 5260
Join date : 2008-12-02
Age : 65
Location : Hawesville,Ky.
Re: 460ford projects
ripped the interior out of mine, plasma cutter been getting put to use, got some glide parts here, tranny being built, got some mr frosty on the way. Got a set of 29.5 10.5 s tires comin so i can run some of the heads up classes around here, you should have snatched them up Nick..........loll
richter69- Posts : 13649
Join date : 2008-12-02
Age : 53
Location : In the winners circle
Re: 460ford projects
the w has an inch wider width, but the s has an inch more rollout. If your running a 10" rim the w is not gonna plant the outer edge very well, a 12" would be better.
I've been just as fast on a 29.5 10.5 as I have with the 31 x 13 and the 31 10.5w
I've been just as fast on a 29.5 10.5 as I have with the 31 x 13 and the 31 10.5w
richter69- Posts : 13649
Join date : 2008-12-02
Age : 53
Location : In the winners circle
Re: 460ford projects
havent you guys figured it out yet the little tires go on the front of the car
capri-sun- Posts : 346
Join date : 2008-12-02
Age : 63
Location : PHILA. PA.
Re: 460ford projects
that the little tires go on the front of the car, oh my bad, they are your rear tires
capri-sun- Posts : 346
Join date : 2008-12-02
Age : 63
Location : PHILA. PA.
Re: 460ford projects
Tweety I can't believe you have not shown theses guys a pic of a the new member of the Ky Bad boyz
This one of Tweety's old racing Buddies . This has got to be one of the nicest cars I have seen. Here is a sneak peak of it
This one of Tweety's old racing Buddies . This has got to be one of the nicest cars I have seen. Here is a sneak peak of it
KY JELLY- Posts : 1530
Join date : 2008-12-03
Re: 460ford projects
NICE!! What's under the glass. 598 or bigger??
F-150- Posts : 2
Join date : 2008-12-02
Re: 460ford projects
It had a 533 with scj's at the turkey trot , no telling what it would run with a 598 .
KY JELLY- Posts : 1530
Join date : 2008-12-03
Re: 460ford projects
SWEET RIDE
capri-sun- Posts : 346
Join date : 2008-12-02
Age : 63
Location : PHILA. PA.
Re: 460ford projects
KY JELLY wrote:It had a 533 with scj's at the turkey trot , no telling what it would run with a 598 .
Damn Randy, you let them brainwash you. "KY JELLY"???? Sack up.
I returned your call last Saturday when I got off work, try me again this Sunday if it fits your schedule.
deerhunter3814- Posts : 144
Join date : 2008-12-02
Location : Blue Grass State
Re: 460ford projects
Yea I saw you called , just been busy hunting and stuff.
KY JELLY- Posts : 1530
Join date : 2008-12-03
Re: 460ford projects
hey is that racin ray ride or is that a different car ---hood looks a little diff then ray car
Re: 460ford projects
bruno wrote:hey is that racin ray ride or is that a different car ---hood looks a little diff then ray car
no its a guy from KY. Its a sweet ride ,carbon fiber tubbs, chromeoly , etc . Its a about 100 lbs lighter than my car
KY JELLY- Posts : 1530
Join date : 2008-12-03
Re: 460ford projects
yeah , that's Mike Baker's new ride, they don't come any nicer!!! Thought I'd save it for you to see when you get up here. I've been trying to get this bunch to the bash for a couple of years . I think they may come this year
56Tbird- BBF CONTRIBUTOR
- Posts : 5260
Join date : 2008-12-02
Age : 65
Location : Hawesville,Ky.
Re: 460ford projects
I currently have 2 engines going together;
#1- Eagle rotating assembly (4.300), Probe pistons, DOVE heads, Crane rockers, B&B stud girdles, 2x4 SK intake, 2-750 vac sec Holleys with side hung bowls, Stefs pan, Trick Flow main girdle, ATI damper, MSD distributor.
#2- Scat 4340 crank (4.500 coming from Adney), Lunati ProMod rods, JE pistons, Trick Flow A460 heads (100% CNC ported), Jesel shaft rockers, Trick Flow single Dominator, 1250 Pro Systems carb, NOS fogger system, Peterson external wet sump oil pump, Danny Bee belt drive, Moroso full kickout pan (modified), Trick Flow main girdle, ATI damper, MSD crank trigger and distributor.
... well that's some of the details anyway
The A headed engine is going in this,
This belongs to a good friend, 598 ci of C headed nitous injected FORD, It's been a 6.41 at 217.
#1- Eagle rotating assembly (4.300), Probe pistons, DOVE heads, Crane rockers, B&B stud girdles, 2x4 SK intake, 2-750 vac sec Holleys with side hung bowls, Stefs pan, Trick Flow main girdle, ATI damper, MSD distributor.
#2- Scat 4340 crank (4.500 coming from Adney), Lunati ProMod rods, JE pistons, Trick Flow A460 heads (100% CNC ported), Jesel shaft rockers, Trick Flow single Dominator, 1250 Pro Systems carb, NOS fogger system, Peterson external wet sump oil pump, Danny Bee belt drive, Moroso full kickout pan (modified), Trick Flow main girdle, ATI damper, MSD crank trigger and distributor.
... well that's some of the details anyway
The A headed engine is going in this,
This belongs to a good friend, 598 ci of C headed nitous injected FORD, It's been a 6.41 at 217.
paulie9fingers- Posts : 134
Join date : 2008-12-02
Age : 62
Location : Maryland
Fancy yellow mustang
Are y'all talking about Mike Baker that had a white Notchback mustang that ran high 5's? He used to run around up here at Bluegrass, Mountain Park and Ohio Valley alot. That car is sweet!
TJ
TJ
Tommyj466- Posts : 322
Join date : 2009-01-06
Location : Versailles Ky
Re: 460ford projects
Same Mike Baker, ran the White notch for years. What's up Tom?
56Tbird- BBF CONTRIBUTOR
- Posts : 5260
Join date : 2008-12-02
Age : 65
Location : Hawesville,Ky.
mustang
Wow, that is one bad ride. Mike is a good guy. I always enjoyed racing with him.
TJ
TJ
Tommyj466- Posts : 322
Join date : 2009-01-06
Location : Versailles Ky
Re: 460ford projects
The Baker's brought their Mustang to the Winter Tech Seminar. That's one BAD ASS RIDE!!
I know the white notch: I knew he looked familiar and now I know who you are talking about.
I know the white notch: I knew he looked familiar and now I know who you are talking about.
D. Sea- Posts : 2768
Join date : 2008-12-02
Age : 55
Location : Kentucky
Re: 460ford projects
well i got my truck all tore apart
body is off and getting ready for a new coat of paint
running gear and motor are in my my shop getting some work done
motor was on the dyno 2 weeks ago
it ran so that made my day
and i just did some work to my 86 f350 6.9 smoker
i just wanted to put new glow plugs in
and well as i am pulling it into the shop it had a water leak
and the started went out
so that sucked the shit out of my wallet and now i am scratching my balls sitting on here cause
i have to wait till pay day to finsh up the truck
and work is so dam slow i gotta jerk the dog off to feed the cat
but it looks like this weekend i should have the motor in and body about half done
i will have to do some befor and after pics when i get it done
if i ever lear how to post a dame pic
body is off and getting ready for a new coat of paint
running gear and motor are in my my shop getting some work done
motor was on the dyno 2 weeks ago
it ran so that made my day
and i just did some work to my 86 f350 6.9 smoker
i just wanted to put new glow plugs in
and well as i am pulling it into the shop it had a water leak
and the started went out
so that sucked the shit out of my wallet and now i am scratching my balls sitting on here cause
i have to wait till pay day to finsh up the truck
and work is so dam slow i gotta jerk the dog off to feed the cat
but it looks like this weekend i should have the motor in and body about half done
i will have to do some befor and after pics when i get it done
if i ever lear how to post a dame pic
jesse- Posts : 447
Join date : 2009-03-18
Age : 45
Location : little falls, mn
Page 1 of 2 • 1, 2
Similar topics
» next projects
» In between projects ........
» New Projects ???
» Future Projects
» 460ford.com is down AGAIN
» In between projects ........
» New Projects ???
» Future Projects
» 460ford.com is down AGAIN
Page 1 of 2
Permissions in this forum:
You cannot reply to topics in this forum