Saw it on YB -Alum. 508 w/Bastard Pro Stock heads??

http://www.yellowbullet.com/forum/showthread.php?t=220152

have no idea, but thought someone may be interested. It's on the bullet and listed as being a short deck aluminum block with bastard prostock heads

Looks like the rocker stand boss is cracked in the one pic.

If you can't see it because you aren't signed up on YB;

Sheet metal intake, Jesel rockers, Jesel keyway lifters, Danny bee gear drive, msd crank trigger, dual dominators, distributor, fuel psi regulator, aluminum rods, recently freshened, lots of spares including pistons, rockers, lifters,springs $9,500 Call jeff 901-465-6155

Ok, getting lots of questions on this motor so I have posted more pictures (Just click the ones shown and let it take you to the photobucket web page) This motor is 4.600 bore, 3.820 stroke it has tfs B460 heads, for more history on the heads look at 460ford.com and search bastard prostock. The crank is Sonny Bryant, the pistons JE w/a compression height of 1.305" and a .250" dome. I don't see a rod length on the build sheet nor a deck height (without one or the other I cant Calculate it) but I can tell you that the deck height is considerably shorter than a stock 460. Thanks Jeff

Pics are here, https://s301.photobucket.com/albums/nn62/oaklandjeff/
__________________

this one . . . .

I don't think those are "Bastard" Pro Stock Heads Just Regular B460 heads (Small Port A's), Some people have gotten a little confused and think if they are B460's it means they are the Basted Prostock off shoot heads.

The Bastard Prostock stuff is a series of heads (about 10 or 12 different designs in small to only prototype batches) done by TFS quite a few years back. Alot of them really are not very good by todays standards, some where flops and some where good by the standards of the day.

yeah, who knows? I sure don't. He just stated in the ad that they are the Bastards ( ) so I assumed they were. Again, I have no idea.

Dave,

They are the Bastard Pro Stock heads, and a fairly late version also. They have the 8 bolt valve covers, which are Dart/Pro Stock Pontiac, and they have the 18 bolt head bolt pattern. Also, notice the offset for the intake rocker arm.

Charlie

Your Right, I only looked at the pics posted hear real fast, didn't go to the Bullit for the full "Monte" so to speak...... But alot of people still think B460 means "Bastard Pro Stock".......

The link to all the guys pics are at the bottom of my first post

Too bad it's a 10 bolt block, still a pretty good deal in my opinion. $9500 doesn't buy much these days...

Looks like it came out of a V-drive

Curt wrote:Looks like it came out of a V-drive

I wondered about that having seen the picture of the oil pan.

Sheet metal intake, Jesel rockers, Jesel keyway lifters, Danny bee gear drive, msd crank trigger, dual dominators, distributor, fuel psi regulator, aluminum rods, recently freshened, lots of spares including pistons, rockers, lifters,springs $9,500 Call jeff 901-465-6155

Danny bee makes a "gear" drive?