my apology and other useless crap

We had some issues with the brand new CNC R heads we got from TFS and they are going to make it right. I am glad to know that there are business's that actually care about there customers. I just wanted to let you guys know this.

Well I lied. They PHUCKED us. It is amazing how things change dealing with companies. They know they had bad castings and have fixed them now but will not make our broken set right. They are "willing" to let us have a new set at "dealer cost".

I canceled my order for a set of "A" heads from TEA also because of this ordeal.

I might as well have bought a set of Pro-Comp. People brag about American made stuff but from the motors that I have had apart the American castings are just as crappy.

My 2JZ-GTE motored Ford Falcon idea is sounding better and better everyday. At least they have made over 2000 HP on a stock block and stock head.

ok , slow down ..lets hear the details ....there is always 2 sides to the story

So , where did they break ?
Is this the Street/strip head with a CJ port ?

Lem Evans wrote:So , where did they break ?
Is this the Street/strip head with a CJ port ?

Here ya go Lem: We had some issues with the brand new CNC R heads

Nevs wrote:

Lem Evans wrote:So , where did they break ?
Is this the Street/strip head with a CJ port ?

Here ya go Lem: We had some issues with the brand new CNC R heads

which are sbf heads ..... but now the guy has a bad taste w/ TFS ......... lets her some details before a company gets bashed

Nevs wrote:

Lem Evans wrote:So , where did they break ?
Is this the Street/strip head with a CJ port ?

Here ya go Lem: We had some issues with the brand new CNC R heads

................................................................................
So, what is a CNC R head I have no ^&&* idea ......big or small block?

Lem Evans wrote:

Nevs wrote:

Lem Evans wrote:So , where did they break ?
Is this the Street/strip head with a CJ port ?

Here ya go Lem: We had some issues with the brand new CNC R heads

................................................................................
So, what is a CNC R head I have no ^&&* idea ......big or small block?

Small block.

Wrong forum .
BBF here.

Lem Evans wrote:Wrong forum .
BBF here.

I know that Lem. I am now building a BBF and have always run TFS heads.

I have never had problems before but this gives me a bad taste. They know they had cast them wrong. I am going to just shut up and keep this to myself. I should have refrained earlier. I apologize for getting pissed off but they are in the wrong.

I will reorder my "A" heads in the morning and I probably buy another set of the R heads too since my pistons are cut for them.

Anyone need a $2000 dollar trot line weight? Just because we have a fast car does not mean we have fast money.

bruno wrote:ok , slow down ..lets hear the details ....there is always 2 sides to the story

Not really two sides to this one. We spent money, heads broke, not their fault even though they are cast wrong and have broken there a lot apparently in the past year, we will spend more money.

That's racing.

sometimes my soapbox gets really tall.

If the stuff is bad they should make it right...period.
My point is......if Ford has a bad Pinto it does not make the F150 bad.

I truly apologize for even posting this. I will cool down. It's just that we have spent a lot of money in the last year and we expected more. Not freeloaders just expected to be treated fairly.

I would be frickin Pissed to if they knew they had bad castiong and said they would make it right then Stick it up your rear...... not good dealing as far as I am concerned...


Randy

Lem Evans wrote:If the stuff is bad they should make it right...period.
My point is......if Ford has a bad Pinto it does not make the F150 bad.

Good point. I just thought everyone knew that my turbo car was a turbo small block by now.

By the way, if everything works out like I think it will I will be contacting you later this summer. I look forward to doing business with you. Everyone here speaks very highly. I am here to learn contacts like you and learn tech about the big Ford motors.

the Coug wrote:I would be frickin Pissed to if they knew they had bad castiong and said they would make it right then Stick it up your rear...... not good dealing as far as I am concerned...


Randy

Randy, I am not quitting them yet. I still think they are better than most everyone else.

I like big boobies..............

(.) (.) You are a big boob e

richter69 wrote:I like big boobies..............

speaking of that, I am watching my wife breastfeed my daughter right now. How do some guys get off on that????

whatbumper wrote: How do some guys get off on that????

Not sure, post of picture of her and we'll let you know.

Curt wrote:

whatbumper wrote: How do some guys get off on that????

Not sure, post of picture of her and we'll let you know.

In your dreams big boy.

What kind of bee's make milk?





Boo bee's.

Giggedy giggedy

How did we go from bad head to boobies. Whoops I don't think that came out right.