WTB Pistons\crank

Want to buy pistons for a 4.3 stroke crank or 4.5 stroke crank. Pref. 80 thous. over bore will consider others.They must be for a 6.8 rod.Also need forged crank for the above Either 4.3 or 4.5 stroke. Thanks Ward

what heads?
stosh

Sorry, need the pistons in flat top or dome for old style A429 aluminum CJ heads.

If you were not in a big hurry.....I will have some 4.42 Diamond Flat tops available..............but would be this fall.........but you never know...........

I have some Wiseco 100 overs in good shape SOLD
Thanks
Stosh

017stosh wrote:I have some Wiseco 100 overs in good shape cheep
Thanks
Stosh

Stosh if ward doesn't want them send me a PM and are these 4.46? or 4.47? I may be interested.....depending on what stroke and rod combo they use...


Thanks Randy

SOLD (6) are used and two are new (the new have new pins and locks). one of the used has to 2 small dimples from the unwanted flying roller bearings (you can see in the pic). i don't see me being able to use these. so there is no sense having them sit around. $200 to your door. SOLD




thanks
stosh

Nice uuuuuuh pistons. Yeah that's it, nice pistons.











Doug...

i've got a customer with a set of ross dome pistons. specs are .250 13cc dome, valve pockets are .300/.150, 1.24 c/h. they are new have pins and spirolox with them. they are for a 4.390 bore 4.5 stroke and 6.8 rod. he said he would take $450 for them shipped. i can probly get some pics if you would like.

Nice uuuuuuh pistons. Yeah that's it, nice pistons. Shocked Laughing


Yes Doug, them's some nice one's

Look like pop ups to me...

and the right side looks bigger than the left, oops, sorry those are valve reliefs

HarHar

with the pop up domes that will make my engine 18.56 so the domes will come off and it will set it @ 14.96, be a nice combo....

Thanks Stosh


Randy

Stosh at this point I think your using that poster to help sell your product. you put your part in the same place on it and take a picture every time you want to sell something

Justin the Girl in the poster is beautiful but she has an Attitude last time I talked to her.........She is pretty and knows she is....


Randy

the Coug wrote:Justin the Girl in the poster is beautiful but she has an Attitude last time I talked to her.........She is pretty and knows she is....


Randy

I can tell, a lot of those poster girls are like that and you just have to glance at them to know. She's pretty, pretty out of my league and not because I'm 16.

she is not like that at all. she aways looks good and never talks back. and for todays shoot i didn't even have to pay her dbl time

Thanks for highjacking my thread maybe you'll have real good luck wiith them! I'm sure someone will return the favor to you. Ward

lance flake wrote:i've got a customer with a set of ross dome pistons. specs are .250 13cc dome, valve pockets are .300/.150, 1.24 c/h. they are new have pins and spirolox with them. they are for a 4.390 bore 4.5 stroke and 6.8 rod. he said he would take $450 for them shipped. i can probly get some pics if you would like.

please send photos if you can,or a part # and I'll look them up. Thanks Ward

Sorry if I helped hijack your thread. I would help you out but the pistons I have are for a 3.85 stroke and 4.390 bore.

dr's wife racing wrote:Thanks for highjacking my thread maybe you'll have real good luck wiith them! I'm sure someone will return the favor to you. Ward

Check your PM Ward......



Randy

There was no highjacking just a misunderstanding.