FS: 4-Link Kit - SOLD
4 posters
Page 1 of 1
FS: 4-Link Kit - SOLD
Copperhead September 30th 2010, 11:00 am
I have a complete set of 4-Link Blueprints along with 8 quality, High Strength Rod Ends 4-Sale
Also included is a set of RH & LH 3/4"-16 high speed steel Taps.
The Rod Ends are top of the line peices (not cheap POS Ebay junk) w/ 3/4"-16 threads & 3/4" bore size. They are rated at 28,000lbs Static Load Capacity.
I bought all of this and ended up installing ladder bars on my truck instead of doing a 4-link, so I no longer need this. I was hanging on to this stuff for a future project, but that's not going to happen anytime soon, hence the reason for me selling.
Price is $100
Add another 10 on for shipping (Cont. 48 only)
The rod ends alone, would run you close to 300 bucks.
Also included is a set of RH & LH 3/4"-16 high speed steel Taps.
The Rod Ends are top of the line peices (not cheap POS Ebay junk) w/ 3/4"-16 threads & 3/4" bore size. They are rated at 28,000lbs Static Load Capacity.
I bought all of this and ended up installing ladder bars on my truck instead of doing a 4-link, so I no longer need this. I was hanging on to this stuff for a future project, but that's not going to happen anytime soon, hence the reason for me selling.
Price is $100
Add another 10 on for shipping (Cont. 48 only)
The rod ends alone, would run you close to 300 bucks.
Last edited by Copperhead on October 6th 2010, 10:51 am; edited 3 times in total
Copperhead- Posts : 492
Join date : 2009-09-05
Age : 53
Location : Pikeville, KY
jbozzelle- Posts : 3705
Join date : 2009-08-10
Age : 50
Location : New Orleans
Re: FS: 4-Link Kit - SOLD
Copperhead September 30th 2010, 8:51 pm
jbozzelle wrote:What brand are the rod ends?
FK Bearings (USA Company)
http://www.fkrodends.com/JMXJMXL15.html
4 of Part # JMX12T (right hand)
4 of Part # JMXL12T (left hand)
Copperhead- Posts : 492
Join date : 2009-09-05
Age : 53
Location : Pikeville, KY
jbozzelle- Posts : 3705
Join date : 2009-08-10
Age : 50
Location : New Orleans
Re: FS: 4-Link Kit - SOLD
Copperhead October 1st 2010, 10:32 am
jbozzelle wrote:Keith,
Do you take paypal?
Yep,.....
kblkbrn@bellsouth.net
Just be sure to add $5 to cover the fees, where I'm letting this go so cheap.
Total would be $115 shipped
Copperhead- Posts : 492
Join date : 2009-09-05
Age : 53
Location : Pikeville, KY
Re: FS: 4-Link Kit - SOLD
dirt_worker October 2nd 2010, 2:30 pm
Keith ill take em If john doesn't....pm me your payment preference.
dirt_worker- Posts : 535
Join date : 2009-04-03
Re: FS: 4-Link Kit - SOLD
jbozzelle October 3rd 2010, 10:35 am
dirt_worker wrote:Keith ill take em If john doesn't....pm me your payment preference.
Go ahead and get them. I was just going to get them for spares but I'll spend the cash on the engine for now.
jbozzelle- Posts : 3705
Join date : 2009-08-10
Age : 50
Location : New Orleans
Re: FS: 4-Link Kit - SOLD
dirt_worker October 3rd 2010, 1:57 pm
Ok....thanks John. I'll take em Keith.
Mike
Mike
dirt_worker- Posts : 535
Join date : 2009-04-03
Re: FS: 4-Link Kit - SOLD
bb429power October 3rd 2010, 4:15 pm
I wish i had seen this sooner, I need a four link for my f100. 
bb429power- Posts : 3129
Join date : 2010-02-13
Age : 30
Location : Michigan
Copperhead- Posts : 492
Join date : 2009-09-05
Age : 53
Location : Pikeville, KY
Similar topics» Moser 4 link 9" housing with axles sold
» SOLD! HEIDTS REAR 4 LINK, FALCON Part# RF-101
» Weld gold Mag. front 15" rims brand new SOLD SOLD SOLD SOLD
» FOR SALE - COMP CAMS CHROME MOLY ROLLER ROCKERS SOLD SOLD SOLD
» Quick Fuel Carb 4150 base 1050 cfm SOLD SOLD SOLD
» SOLD! HEIDTS REAR 4 LINK, FALCON Part# RF-101
» Weld gold Mag. front 15" rims brand new SOLD SOLD SOLD SOLD
» FOR SALE - COMP CAMS CHROME MOLY ROLLER ROCKERS SOLD SOLD SOLD
» Quick Fuel Carb 4150 base 1050 cfm SOLD SOLD SOLD
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum