"Storage Sale !"
3 posters
Page 1 of 1
"Storage Sale !"
I need some parts for my projects and have the below you will find list of part we need as well as the parts we have to bargain with.
I am looking for:
1) Hyd conversion kit for Place Diverter
2) 9.5" Impeller
3) K&N Air Filters (E-2720)
4) Summit Racing Rear Shackle Kits (SUM-G904000)
5) Jet Drive Parts are also welcome
6) 4 - 16.5 Dually wheels (I have 4 16" wheels for trade)
7) 2 - 16.5 x 10 wheels
BBF Solid Roller Lifters for Blue Thunder/D0VE Heads
Bargain with parts;
All resonable offers will be considered !
Auto Meter Pro Comp Memory Tach
http://www.performanceboats.com/showthread.php?79078-Pro-Comp-Memory-Tachometer
6.5hp gas air compressor
http://www.performanceboats.com/showthread.php?78495-Gas-Air-Compressor
NEW Summit 16 Gallon fuel cell
http://www.performanceboats.com/showthread.php?69258-NEW-Summit-16-Gallon-fuel-cell
Sleekcraft Rebel
http://www.performanceboats.com/showthread.php?74604-Sleekcraft-Reble
17' Schuster
http://www.performanceboats.com/showthread.php?74605-17-Schuster
Comp Cams XM298H with #ered lifters $150
20 Gal Fuel Safe Blader fuel cell $180
1.8 Miller Rockers
Jim in Bullhead City Az 86442, 928-219-4929 Leave a message please !
I am looking for:
1) Hyd conversion kit for Place Diverter
2) 9.5" Impeller
3) K&N Air Filters (E-2720)
4) Summit Racing Rear Shackle Kits (SUM-G904000)
5) Jet Drive Parts are also welcome
6) 4 - 16.5 Dually wheels (I have 4 16" wheels for trade)
7) 2 - 16.5 x 10 wheels
BBF Solid Roller Lifters for Blue Thunder/D0VE Heads
Bargain with parts;
All resonable offers will be considered !
Auto Meter Pro Comp Memory Tach
http://www.performanceboats.com/showthread.php?79078-Pro-Comp-Memory-Tachometer
6.5hp gas air compressor
http://www.performanceboats.com/showthread.php?78495-Gas-Air-Compressor
NEW Summit 16 Gallon fuel cell
http://www.performanceboats.com/showthread.php?69258-NEW-Summit-16-Gallon-fuel-cell
Sleekcraft Rebel
http://www.performanceboats.com/showthread.php?74604-Sleekcraft-Reble
17' Schuster
http://www.performanceboats.com/showthread.php?74605-17-Schuster
Comp Cams XM298H with #ered lifters $150
20 Gal Fuel Safe Blader fuel cell $180
1.8 Miller Rockers
Jim in Bullhead City Az 86442, 928-219-4929 Leave a message please !
Last edited by JR Performance Motorsport on April 3rd 2011, 5:44 pm; edited 15 times in total
Re: "Storage Sale !"
There is also so more Used parts & New parts on my site, e-PerformanceMarine.com.
K&N Airforce Pre-Cleaner Air Filter Wrap 14x6" P/N 25-3770 New In Package - $16
K&N Stubstack - Carter AFB or EdelBrock P/N 85-0700 New In Box - $35
Complete D1 460 with C6 trans, $400
Jim in Bullhead City Az 86442, 928-219-4929 Leave a message please !.
D9TE Ford Motorsport 460 short block, Std bore, $300
K&N Airforce Pre-Cleaner Air Filter Wrap 14x6" P/N 25-3770 New In Package - $16
K&N Stubstack - Carter AFB or EdelBrock P/N 85-0700 New In Box - $35
Complete D1 460 with C6 trans, $400
Jim in Bullhead City Az 86442, 928-219-4929 Leave a message please !.
D9TE Ford Motorsport 460 short block, Std bore, $300
Last edited by JR Performance Motorsport on March 23rd 2011, 6:28 pm; edited 2 times in total
Re: "Storage Sale !"
Bow Tank, it has a leak somewhere, $100
Used 12JC One Piece Bowl Pump $900
I have had this pump sitting for at least 8 months collecting dust.
Fresh Rebuilt 12JC One Piece Bowl Pump $1400
20 Gal Fuel Tanks
I have a few pairs of large Aluminum Tanks.
Imco 20gal each. They have a slight taper, 60"L x 9.5"Hx 7.5"W $400
Skyline 20gal. They are 47"L x 14"H x 10"T and 5.75"B $300
Jim
928-219-4929
ePerformanceMarine@yahoo.com
Everything is in Bullhead City AZ 86442
Used 12JC One Piece Bowl Pump $900
I have had this pump sitting for at least 8 months collecting dust.
This is a professionally inspected jet drive by JR Performance Motorsports. It has new seals, gaskets and has a new packing gland seal. Thrust bearing has been thoroughly checked and repacked with grease. The impeller shaft has been checked for excessive runout. The pump is also set up with .045 thrust clearance and .012 radial clearance. Pump has a good Used Aluminum "A" Impeller. The "C"/one piece bowl has been cleaned up and is in good condition. This Jet Drive pump will get you on the water this season trouble free.
This is not a rebuilt pump, it has been gone thru and cleaned up completely then painted. This pump is 100% complete.
Fresh Rebuilt 12JC One Piece Bowl Pump $1400
This is a professionally fully rebuilt jet drive by JR Performance Motorsports. It has new seals, gaskets and has a new packing gland seal. It also has a New Thrust Bearing that has been thoroughly checked and packed with grease. The impeller shaft has been checked for excessive runout, .005" of run out. The pump is also set up with .023" thrust clearance and .030" radial clearance. Pump has a New Berkeley Aluminum "A" Impeller. The "C"/one piece bowl has been cleaned up and is in good condition. This Jet Drive pump will give you many seasons of trouble free on the water.
This pump is 100% complete.
20 Gal Fuel Tanks
I have a few pairs of large Aluminum Tanks.
Imco 20gal each. They have a slight taper, 60"L x 9.5"Hx 7.5"W $400
Skyline 20gal. They are 47"L x 14"H x 10"T and 5.75"B $300
Jim
928-219-4929
ePerformanceMarine@yahoo.com
Everything is in Bullhead City AZ 86442
Last edited by JR Performance Motorsport on March 23rd 2011, 6:26 pm; edited 1 time in total
Re: "Storage Sale !"
5 gallon round gas tank with mounts. $75
Jim in Bullhead City Az 86442, 928-219-4929 Leave a message please !.
Jim in Bullhead City Az 86442, 928-219-4929 Leave a message please !.
Re: "Storage Sale !"
Does blue thunder heads take different lifters than dove heads? Man, I need to check before I post.
Last edited by 342g on April 3rd 2011, 10:31 am; edited 1 time in total
342g- BBF CONTRIBUTOR
- Posts : 3237
Join date : 2009-08-06
Age : 81
Location : Lawrenceburg, In.
Re: "Storage Sale !"
No but some other heads require offset pushrod buckets I think.342g wrote:Does blue thunder heads take different lifters than dove heads? Man, I need to check before I post.
Similar topics
» Eagle H beam forged rods sale .990 pin 6.605 length for sale.
» Top-end off my 523 testing waters for possible sale Possible sale of complete engine!
» ENGINES and PARTS FOR SALE ETC ETC END OF YEAR SALE
» Crank care and storage
» FOR SALE
» Top-end off my 523 testing waters for possible sale Possible sale of complete engine!
» ENGINES and PARTS FOR SALE ETC ETC END OF YEAR SALE
» Crank care and storage
» FOR SALE
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum