comp cam retainers

Does anyone on here use comp cam spring pn.947?, I need a set of chrome molly retainers to fit them, I know someone makes them, but I can't find them.

What's the spring diameter? I have some but mine are for 1.47-1.55 diameter springs. I'm thinking the 947's are a 1.625" spring.







Doug...

1.645, od, but thanks for trying.

Those are double springs right? I have two sets of Titanum. 10°

Curt wrote:Those are double springs right? I have two sets of Titanum. 10°

They are triple springs.

I have a set at Charlie's for triple springs.

Curt wrote:I have a set at Charlie's for triple springs.

What is the diameter, mine are 1.645 o.d. .635 i.d., if you have a summit book, you can get all the info.

I don't have them here to measure. I'm headed up that way soon, or if Charlie reads this, maybe he could measure them for you. I am pretty sure they would be what your looking for. They are Comp retainers for triples.

Curt wrote:I don't have them here to measure. I'm headed up that way soon, or if Charlie reads this, maybe he could measure them for you. I am pretty sure they would be what your looking for. They are Comp retainers for triples.

O.K., how much you need for them, remember I'm on a fixed income, seriously let me know.

Harold, let me double check with Charlie, I know he has a set of keepers I'm not sure on the retainers. I am out of town until Sunday night.

342g wrote:O.K., how much you need for them, remember I'm on a fixed income, seriously let me know.

I'll start the offer out for Harold .......... $20 and you throw in a set of shaft rockers Had to do it.......

Here is what he needs...........
1.500" total dia.
1.180" 1st step
.870" 2nd step
.635" 3rd step
It could matter if the retainer was +.050" or not considering that the spring is rated at 2.00" installed ht.

Lem Evans wrote:Here is what he needs...........
1.500" total dia.
1.180" 1st step
.870" 2nd step
.635" 3rd step
It could matter if the retainer was +.050" or not considering that the spring is rated at 2.00" installed ht.

Lem,
Is the moly retainer that Harold needs the same as what comes w/TFS A heads when new? If so I have a set for him.

Harold,since your drawing (OLD AGE PENSION)check. I could let you have them at a reduced price of FREE.

TFS package is not C.M. steel........Ti. it is and the springs are double.
The guy I want to talk to the MF'er that told him he needed triple springs for his application.
I don't want to say this but I will...........Harold, if you had called me 1st you would not be in this queered up package

Curt wrote:I have a set at Charlie's for triple springs.

Curt,

No sir, there is nothing here at my place. I turned everything over to Jet Boat Bob, when I gave him the heads a long time ago. The date on the final flow sheet is 8-6-09, so it was back then.

Charlie

OK, thanks Charlie. I'll take a look when I make it up there.

Still waiting Harold. I know with certainty that I have two sets for doubles. :/

I have some too,I will check

Harold,the ones I have are smaller at the 2nd and 3rd steps than the #'s that Lem posted.