Well I've been called out....
+16
paulie
Barney
jones
bbf-falcon
the1969fordguyinky
dfree383
bb429power
GT300TD
69F100
TravisRice
richter69
cool40
DFI429
bruno
BigDave65
Big block fox 339
20 posters
Page 1 of 2
Page 1 of 2 • 1, 2
Well I've been called out....
By another bbf fox
All I've been told is it's a beast
Here's the mods
Over 30 cast pistons they thought they were dome
Stock heads they don't know what kind
A big cam they ain't sure on it either it's just big
Edelbrock 600 carb
Fram oil filter
I also heard it won't run with the coil wired straight to the batterie lol
Should I b worried lmao
All I've been told is it's a beast
Here's the mods
Over 30 cast pistons they thought they were dome
Stock heads they don't know what kind
A big cam they ain't sure on it either it's just big
Edelbrock 600 carb
Fram oil filter
I also heard it won't run with the coil wired straight to the batterie lol
Should I b worried lmao
Last edited by Big block fox 339 on January 30th 2011, 6:42 pm; edited 3 times in total
Big block fox 339- Posts : 279
Join date : 2009-11-23
Age : 37
Location : Philadelphia Ms.
Re: Well I've been called out....
They're probably lying!
BigDave65- Posts : 567
Join date : 2009-08-12
Age : 59
Location : Cliffside, NC
Re: Well I've been called out....
damn laughed so hard i nearly pissed my pants
_________________
coming soon x275 build .........
thanks to all my sponsors :
www.OakleyMotorsports.com
www.Induction-Solutions.com
www.bfevansraceparts.com
www.ultimateconverter.com
www.keithfulpmotorsports.com
Re: Well I've been called out....
Ha ha and that ain't the whole storybruno wrote:damn laughed so hard i nearly pissed my pants
My insider also said that when they bolted up the trans the dowl pin holes were full of dirt they tighten it till it broke the bell housing
Big block fox 339- Posts : 279
Join date : 2009-11-23
Age : 37
Location : Philadelphia Ms.
Re: Well I've been called out....
Big block fox 339 wrote:Ha ha and that ain't the whole storybruno wrote:damn laughed so hard i nearly pissed my pants
My insider also said that when they bolted up the trans the dowl pin holes were full of dirt they tighten it till it broke the bell housing
LOL... Capitalize on the ignorance...Remind them 'God made dirt & dirt don't hurt'
Then run em'.. from a safe distance
Re: Well I've been called out....
If he gets me off the start I'm stopping lol
Big block fox 339- Posts : 279
Join date : 2009-11-23
Age : 37
Location : Philadelphia Ms.
Re: Well I've been called out....
dont count him out! i've saw and been outrun by some shit i laughed at.
cool40- BBF CONTRIBUTOR
- Posts : 7313
Join date : 2009-08-31
Age : 53
Location : on the 1/8 mile dyno
Re: Well I've been called out....
tell him you'll race for 10 stacks...............
richter69- Posts : 13649
Join date : 2008-12-02
Age : 53
Location : In the winners circle
Re: Well I've been called out....
cool40 wrote:dont count him out! i've saw and been outrun by some shit i laughed at.
Aint that the truth !!! I remember when I was probably 20 or so and had a Maverick Grabber that I converted over to a 4 speed, bone stock bottom end with a big camshaft, a set of early 289 heads. That car was as fun as it gets. 7000 rpm powershifts, never broke anything, drive it to the race track over an hour one way and race it, bring it home and all on less than $10 worth car of pump gas. The car ran a best of 12.89 but would run 12.90-13.00s on anygiven day. That was back in 89-90 and the fastest street car ran in the mid 11's around here. Well we went to the racetrack and I parked beside a VW Beetle, megaphone pipe, lettered like a super stocker (EVIL BEETLE).......you get it. I thought how fast can that thing possiblly be. Well I purposely waited to line up against it and I was sucessful. He handed me my ass when it ripped off a high 10 second pass. Boy I felt stupid but atleast I did ot run my mouth, just made an assumption and kept it to myself........ just goes to show how things arent always as they appear.
Hope they are not suckering you in .........
TravisRice- BBF CONTRIBUTOR
- Posts : 1192
Join date : 2009-02-07
Re: Well I've been called out....
cool40 wrote:dont count him out! i've saw and been outrun by some shit i laughed at.
I'm pretty sure there Truley retarded you can't dream up some of the stuff I've been told
Besides how fast can it b with a eddelbroke
Big block fox 339- Posts : 279
Join date : 2009-11-23
Age : 37
Location : Philadelphia Ms.
Re: Well I've been called out....
They used to be a guy here back in the 80s that ran at the circle track with a dodge cornet to look at it you would think it was just pulled up out of a barn or field that won every weekend.The engine in it looked about like that just old junk but the inside had the high dollar stuff in it he said why waste money on paint it don't make it run any faster or help if you reck it.
I am not taking up with them just becareful looks don't mean one want run
Jim
I am not taking up with them just becareful looks don't mean one want run
Jim
69F100- BBF CONTRIBUTOR
- Posts : 5386
Join date : 2009-01-04
Age : 57
Location : Irwinville Ga.
Re: Well I've been called out....
Some new insider intel
O yeah that's brake cleaner in the video
https://i635.photobucket.com/albums/uu78/bigblockfox/e0f94291.mp4
O yeah that's brake cleaner in the video
https://i635.photobucket.com/albums/uu78/bigblockfox/e0f94291.mp4
Big block fox 339- Posts : 279
Join date : 2009-11-23
Age : 37
Location : Philadelphia Ms.
Re: Well I've been called out....
Maybe you had better reconsider racing him, the paint on the block is awfully close to cheby orange. That will easily add 100 horsepower?!!
GT300TD- BBF CONTRIBUTOR
- Posts : 631
Join date : 2009-12-11
Age : 76
Location : Lancaster, Ohio
Re: Well I've been called out....
unless he's got some kinda tire to put on it what's in the pic aint gona get it done.i'd want to whip his ass for the half assed queer paint on the motor,however it runs.
cool40- BBF CONTRIBUTOR
- Posts : 7313
Join date : 2009-08-31
Age : 53
Location : on the 1/8 mile dyno
Re: Well I've been called out....
Can someone tell me why he keeps spraying his brake cleaner in the carb? Dude, just let it run. Nice paint job too, I need to go beat his azz. And when will people realize that BBF's are nothing like chebbies? 600cfm ain't gonna cut it, I could run one on my stock 460 and it would still want more For god sakes, my friend has a 4150 holley 750 on his stock 302 and it runs healthy as an ox.
bb429power- Posts : 3129
Join date : 2010-02-13
Age : 30
Location : Michigan
Re: Well I've been called out....
They said we finna get a 1250 dommy I think this one is to small lol
Big block fox 339- Posts : 279
Join date : 2009-11-23
Age : 37
Location : Philadelphia Ms.
Re: Well I've been called out....
Big block fox 339 wrote:cool40 wrote:dont count him out! i've saw and been outrun by some shit i laughed at.
I'm pretty sure there Truley retarded you can't dream up some of the stuff I've been told
Besides how fast can it b with a eddelbroke
Depends on who built it.... I've seem some Junk that would supprise you and built to look like crap..... I remember street racing in Chacago in the Early-Mid 90's and seeing some stuff like that the are actualy disguised race cars......
But judging by the other pic's, I wouldn't worry to much about that one, The Regular Street Tires kill it... If he'd have some Slicks or DR's.... Might mean a little business.......
dfree383- BBF CONTRIBUTOR
- Posts : 14851
Join date : 2009-07-09
Location : Home Wif Da Wife.....
Re: Well I've been called out....
Are those valve covers stacked?!
the1969fordguyinky- Posts : 237
Join date : 2009-08-24
Location : Taylorsville, KY
Re: Well I've been called out....
the1969fordguyinky wrote:Are those valve covers stacked?!
The extenions probably mean Roller Rockers
bbf-falcon- Posts : 8995
Join date : 2008-12-03
Location : Jackson, Ohio
Re: Well I've been called out....
Yeah roller rockers, 800 lift cam and stock valve springs
Big block fox 339- Posts : 279
Join date : 2009-11-23
Age : 37
Location : Philadelphia Ms.
Re: Well I've been called out....
Huh. I've never seen such a thing. Seems like it would leak for sure. But I do admire the McGuiver like spirit of some backyard mechanics! Lets hope they do get it running so you can have a bit of a challenge, BBFox339.
the1969fordguyinky- Posts : 237
Join date : 2009-08-24
Location : Taylorsville, KY
Re: Well I've been called out....
So when is this suppose to take place? skeet or track? Is this car from the Junkyard area??
jones- Posts : 2230
Join date : 2008-12-02
Location : Philadelphia, MS.
Re: Well I've been called out....
jones wrote:So when is this suppose to take place? skeet or track? Is this car from the Junkyard area??
I really don't know it ain't road worthy the battery is sitting on the radiator support and it's running gas out of a coke bottle.
I think there from Lena. I prefer the track.
Big block fox 339- Posts : 279
Join date : 2009-11-23
Age : 37
Location : Philadelphia Ms.
Re: Well I've been called out....
Barney wrote:"HUSTLIN"
I got some juice if I need it
Big block fox 339- Posts : 279
Join date : 2009-11-23
Age : 37
Location : Philadelphia Ms.
Page 1 of 2 • 1, 2
Similar topics
» Would the person that called me about having the 514 pistons give me a call or anyone else that might have one.
» my wife just called me ....
» Pro 98 Mustang called today
» Uncle Charlie,,,,,,,,,,, is this our cousin????
» FRANK JUST CALLED, THEY ARE HEADED TO THE LANES
» my wife just called me ....
» Pro 98 Mustang called today
» Uncle Charlie,,,,,,,,,,, is this our cousin????
» FRANK JUST CALLED, THEY ARE HEADED TO THE LANES
Page 1 of 2
Permissions in this forum:
You cannot reply to topics in this forum