Re: custom thor project

bruno February 8th 2011, 1:23 am

gotta post some more pics of John's work truley an amazing artist with his welding skills .....sorry guys im just amazed at his work ..... also ck out the last pics of this repaired intake due to it being thin in some spots after porting

custom thor project - Page 2 Olds1

here is the repaired pieces

custom thor project - Page 2 Repair1

res0rli9 February 8th 2011, 1:38 am

just AWESOME skills Cool

Outlaw5.0 February 8th 2011, 1:50 am

bruno wrote:
138 wrote:a little more info on your quest for others to see....

http://www.460ford.com/forum/showthread.php?t=116411

great read outlaw ....it seems like they field has gained about a second in the quarter since you first started this project ...... but i believe an f3 on this build should still get you there

Yeah no doubt. The cylinder heads were the biggest hold up and still are. They are almost done, but always put off.

Now Dart has nice new block that can go 9.600, 9.800, 10.200 with all the features of the DRCE 2 block. I could put a 4.00 stroke in a 9.600 or 9.800 deck and had a 532 and slightly less rpm.

138 February 8th 2011, 1:59 am

Outlaw5.0 wrote:
bruno wrote:
138 wrote:a little more info on your quest for others to see....

http://www.460ford.com/forum/showthread.php?t=116411

great read outlaw ....it seems like they field has gained about a second in the quarter since you first started this project ...... but i believe an f3 on this build should still get you there
Yeah no doubt. The cylinder heads were the biggest hold up and still are. They are almost done, but always put off.

Now Dart has nice new block that can go 9.600, 9.800, 10.200 with all the features of the DRCE 2 block. I could put a 4.00 stroke in a 9.600 or 9.800 deck and had a 532 and slightly less rpm.

is that dart chevy based?...and what are you gonna run for a power adder?

Outlaw5.0 February 8th 2011, 2:17 am

138 wrote:
Outlaw5.0 wrote:
bruno wrote:
138 wrote:a little more info on your quest for others to see....

http://www.460ford.com/forum/showthread.php?t=116411

great read outlaw ....it seems like they field has gained about a second in the quarter since you first started this project ...... but i believe an f3 on this build should still get you there
Yeah no doubt. The cylinder heads were the biggest hold up and still are. They are almost done, but always put off.

Now Dart has nice new block that can go 9.600, 9.800, 10.200 with all the features of the DRCE 2 block. I could put a 4.00 stroke in a 9.600 or 9.800 deck and had a 532 and slightly less rpm.

is that dart chevy based?...and what are you gonna run for a power adder?

Yes that is GM based, I doubt we will ever see a short deck Ford beside the new prostock block. Power adder will be Procharger F3-139.

138 February 8th 2011, 2:24 am

Outlaw5.0 wrote:
138 wrote:
Outlaw5.0 wrote:
bruno wrote:
138 wrote:a little more info on your quest for others to see....

http://www.460ford.com/forum/showthread.php?t=116411

great read outlaw ....it seems like they field has gained about a second in the quarter since you first started this project ...... but i believe an f3 on this build should still get you there
Yeah no doubt. The cylinder heads were the biggest hold up and still are. They are almost done, but always put off.

Now Dart has nice new block that can go 9.600, 9.800, 10.200 with all the features of the DRCE 2 block. I could put a 4.00 stroke in a 9.600 or 9.800 deck and had a 532 and slightly less rpm.

is that dart chevy based?...and what are you gonna run for a power adder?
Yes that is GM based, I doubt we will ever see a short deck Ford beside the new prostock block. Power adder will be Procharger F3-139.

DanH February 8th 2011, 3:59 am

moving the lifter bores . did you relocate the mounting point of the rocker stands , valve guides on the E Head . also did you figure out the valve covers

Outlaw5.0 February 8th 2011, 12:32 pm

DanH wrote:moving the lifter bores . did you relocate the mounting point of the rocker stands , valve guides on the E Head . also did you figure out the valve covers

The intake lifters bores are getting moved soon. The valves were rotated much as possible, Intake valve angle is 12 x4 I beleive. Valve covers are just DRCE 2. Rockers are all sorted out. The photo below explains the valve rotation.

The DRCE head 3 has the bottom valve cover rail moved down, this allows the valves to be rotated more.

custom thor project - Page 2 E-460machining007

custom thor project - Page 2 E-460machining007

TravisRice February 8th 2011, 9:25 pm

bruno wrote:gotta post some more pics of John's work truley an amazing artist with his welding skills .....sorry guys im just amazed at his work ..... also ck out the last pics of this repaired intake due to it being thin in some spots after porting

here is the repaired pieces

DAYUMMM NICE !!! Very smooth looking plenum. cheers

bbf-falcon March 21st 2012, 2:48 am

bbf-falcon wrote:He is building a new intake like that for my buddies FE (A oneoff deal). He does fantastic work.

Update.......Actually there is no progress on my buddy's intake. He gave marcella $1000 up front over a year ago and he hasn't even started building it yet Rolling Eyes

If you order anything from him,make sure it's for a future project Twisted Evil

dfree383 March 21st 2012, 7:55 am

Artist get that way, if your in a hurry..... Get a small block Chevy ! lol!

bbf-falcon March 21st 2012, 8:25 pm

I agree, BUT,don't string a customer along either. He was told in the beginning it would be no more than 6 months. For the LAST 6 months its been.(quote) you will have it in 2 weeks. be a man of your word is all i'm saying.

Outlaw5.0 March 24th 2012, 12:00 pm

My intake took way longer also. John does awesome work, but he is basically a one man show.

Injected65 April 2nd 2012, 10:55 pm

bbf-falcon wrote:I agree, BUT,don't string a customer along either. He was told in the beginning it would be no more than 6 months. For the LAST 6 months its been.(quote) you will have it in 2 weeks. be a man of your word is all i'm saying.

Was that FE intake he posted just the other day not your buddies? It sure looked badass for whoever was getting it.

Chris

Sponsored content