Flat top pistons
4 posters
Page 1 of 1
Flat top pistons
I am looking for some flat top pistons for my 460 build. I would take .030 over or maybe .040 over. These will be going on stock rods.
Let me know what you got and how much.
Thanks!!
Let me know what you got and how much.
Thanks!!
98-9.0Mustang- Posts : 67
Join date : 2010-11-15
Age : 49
Location : Iowa
Re: Flat top pistons
P.M. Sent
61coon- Posts : 1824
Join date : 2009-08-07
Age : 47
Location : Hillsboro,TN
PISTONS
HI THERE I HAVE A NEW SET OF .030 STOCK REPLACEMENT WITH SMALL DISH FOR 100.00 PLUS SHIPPING IF INTERESTED THANKS CURT.
c-main- Posts : 39
Join date : 2011-01-28
Age : 64
Location : INDEPENDENCE IA
flat top pistons
Hi, I have a set of pistons that have only been used less than an hour. Never made a pass with them. They are TRW flat top w/one valve pocket (like a CJ piston ) They are forged & look almost new. I just took them out & am currently looking for a set I can use with Kasse SCJ aluminum heads. I would need to get them pressed off of the rods. I was planning that for tomorrow. If you are interested I'll take $250 + ride w/ rings.
Let me know & I can send you pic's.
Ron
Let me know & I can send you pic's.
Ron
cobrajetkid- Posts : 2
Join date : 2011-02-20
Age : 73
Location : Tylertown, Ms.
Similar topics
» Flat top Speed Pro pistons
» where the flat top pistons?
» wtb .030 flat top pistons
» WTB - 2 4.440" Flat-tops Pistons
» 460 Flat Top or Dome Pistons
» where the flat top pistons?
» wtb .030 flat top pistons
» WTB - 2 4.440" Flat-tops Pistons
» 460 Flat Top or Dome Pistons
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum