2010 TS mustang in the works
+35
James Hahn
dfree383
Jeff Chandler
BIGDOG466
Treeyasoon
ThndrChkn
69F100
TravisRice
chasman
jones
NOS42
bigblockfox468
BigBlockFalcon
Curt
svted
richter69
GTmustang
511Fox
bruno
cool40
512Fairlane
Mark Miller
'65 T-BOLT
Tony M
bbf-falcon
jbozzelle
Darrin Gorham
BigDave65
DILLIGASDAVE
Top Sportsman 514X
Nevs
whatbumper
D. Sea
paulie9fingers
86bigblockbird
39 posters
Page 1 of 7
Page 1 of 7 • 1, 2, 3, 4, 5, 6, 7
2010 TS mustang in the works
Well, as off november we sold the 86 t-bird and started on a 2010 Top Sportsman mustang. the Chassis is being done by Advanced Chassis in Antwerp, Oh we are now about 2 months into the build and i've got some free time to share pics. i'll try to group them from when they were taken.
These are from november just after they got the body in from rousch
These are from november just after they got the body in from rousch
86bigblockbird- Posts : 100
Join date : 2009-12-15
Re: 2010 TS mustang in the works
I can't remember the date for the rest of the pics, but they are all from between november and now, HAHA.
I think these are from the End of december.
I think these are from the End of december.
86bigblockbird- Posts : 100
Join date : 2009-12-15
Re: 2010 TS mustang in the works
Then these were from second week in january, it was starting to look like something.
86bigblockbird- Posts : 100
Join date : 2009-12-15
Re: 2010 TS mustang in the works
THese were from the middle of january too.
86bigblockbird- Posts : 100
Join date : 2009-12-15
Re: 2010 TS mustang in the works
Then here are from yesterday.
86bigblockbird- Posts : 100
Join date : 2009-12-15
Re: 2010 TS mustang in the works
Lookin' good, what's the engine gonna be, my buddy is getting ready to sell his Fulton 698 from his car.
paulie9fingers- Posts : 134
Join date : 2008-12-02
Age : 62
Location : Maryland
Re: 2010 TS mustang in the works
Sweet!
Can I borrow it for a weekend when you are finished?
Can I borrow it for a weekend when you are finished?
D. Sea- Posts : 2768
Join date : 2008-12-02
Age : 55
Location : Kentucky
Re: 2010 TS mustang in the works
The motor is taken care of. it's a BES motor that they are freshining as we speak. hopefully it'll be ready to dynp by next week. it's a 645 with C&C alum block, Gen 1 thors, and stages in a sheet metal intake.
It probably won't be available to borrow until at least 2015, haha sorry
Here are a couple more pictures from yesterday that i found.
It probably won't be available to borrow until at least 2015, haha sorry
Here are a couple more pictures from yesterday that i found.
86bigblockbird- Posts : 100
Join date : 2009-12-15
Re: 2010 TS mustang in the works
Very nice. One of these days that is the direction that I will take my program.
Keep us updated.
Keep us updated.
whatbumper- Posts : 3024
Join date : 2009-11-11
Age : 44
Re: 2010 TS mustang in the works
It's something i've wanted to do for a long time and my dad and i are able to do it together so we are going for it. they are planning to finish the doors today and they'll start the interior and tin work monday.
86bigblockbird- Posts : 100
Join date : 2009-12-15
Re: 2010 TS mustang in the works
SWEET!!! I'm first on the list to 'borrow' your car
Seriously. Your new T/S car looks BAD ASS!! Congrats!
Seriously. Your new T/S car looks BAD ASS!! Congrats!
D. Sea- Posts : 2768
Join date : 2008-12-02
Age : 55
Location : Kentucky
Re: 2010 TS mustang in the works
Beautiful work!
Nevs- BBF CONTRIBUTOR
- Posts : 2724
Join date : 2009-02-07
Age : 70
Location : NW Iowa(Odebolt)
Re: 2010 TS mustang in the works
well, they are really going to town on the interior now.
86bigblockbird- Posts : 100
Join date : 2009-12-15
Re: 2010 TS mustang in the works
Looks like it's going to be a beautiful piece! Can't wait to see it done.
Top Sportsman 514X- Posts : 41
Join date : 2009-08-12
Re: 2010 TS mustang in the works
Thanks we are really looking forward to seeing all you top sportsman guys once we get things sorted out. They had finished 3 other cars that were in the shop before ours and are out to their owners now, so they are going to have a couple guys working on the interior the next few weeks. we're hoping that means it'll be going to powder coat in two weeks or so.
86bigblockbird- Posts : 100
Join date : 2009-12-15
Re: 2010 TS mustang in the works
I love the rear cage support bar layout from the top of the main hoop to the top of the tubs. Instead of the more common way of bending the bar in a loop over the top of the tubs, he cut/welded bars to make the same shape, but with steeper outward angles much like the way Tim McAmis does his chassis.
Very nice.
Very nice.
DILLIGASDAVE- Posts : 2262
Join date : 2009-08-08
Location : Texas. pronounced "texASS"
Re: 2010 TS mustang in the works
I've got Mustang envy . That's going to be a nice piece. The guy who built my car just finished up an 09' for a customer. I love the new body style.
BigDave65- Posts : 567
Join date : 2009-08-12
Age : 59
Location : Cliffside, NC
Re: 2010 TS mustang in the works
who made the body?
Darrin Gorham- Posts : 180
Join date : 2009-08-08
Location : Covington WA
Re: 2010 TS mustang in the works
He mentioned the body coming from Rousch.
That thing looks killer. I'm envious... There is a local guy who has a new 2010 built by Eastexas Racecars. It's a sweet piece!
That thing looks killer. I'm envious... There is a local guy who has a new 2010 built by Eastexas Racecars. It's a sweet piece!
jbozzelle- Posts : 3705
Join date : 2009-08-10
Age : 50
Location : New Orleans
Re: 2010 TS mustang in the works
The body is from ford racing and roush racing. it actually has a ford part number cast into the fiberglass. i'm pretty sure they are the only company licensed to build the 2010 mustang bodies. it's basically a pro stock body, but fiberglass rather than carbon fiber
86bigblockbird- Posts : 100
Join date : 2009-12-15
Re: 2010 TS mustang in the works
thanks , just looked in the ford racing catalogand its there I have to fix a 97 I destroyed so probably upgrade to new style. Yours looks good!
Darrin Gorham- Posts : 180
Join date : 2009-08-08
Location : Covington WA
Re: 2010 TS mustang in the works
Thats gonna be a killer Mustang. Looks like that shop has done a few. Nice lookin work
bbf-falcon- Posts : 8995
Join date : 2008-12-03
Location : Jackson, Ohio
Re: 2010 TS mustang in the works
Thanks, we are really looking forward to getting it on the track. The engineis getting dynoed saturday so it's gettin closer.
86bigblockbird- Posts : 100
Join date : 2009-12-15
Re: 2010 TS mustang in the works
Well, here are some updated pictures. the tin work is starting to go in. they said they are about 2 weeks from powder coat. so we should be racing by the end of may.
86bigblockbird- Posts : 100
Join date : 2009-12-15
Re: 2010 TS mustang in the works
And these are from today.
86bigblockbird- Posts : 100
Join date : 2009-12-15
Page 1 of 7 • 1, 2, 3, 4, 5, 6, 7
Similar topics
» 2010 mustang
» 2005-2010 MUSTANG BODY
» complete orginal 77 mustang ll,302 auto,t-top trade for newer mustang, can be roller
» Dragstrip result AFR 280 heads
» Waking up a stock 5.0 roller engine - valvespring options while keeping stock retainers/rotators, etc...?
» 2005-2010 MUSTANG BODY
» complete orginal 77 mustang ll,302 auto,t-top trade for newer mustang, can be roller
» Dragstrip result AFR 280 heads
» Waking up a stock 5.0 roller engine - valvespring options while keeping stock retainers/rotators, etc...?
Page 1 of 7
Permissions in this forum:
You cannot reply to topics in this forum