scat rods and cam
+2
Volz 429
Larry T
6 posters
Page 1 of 1
scat rods and cam
Larry T September 3rd 2015, 7:36 pm
i have a nice set of 6.700 4340 forged h beam scat rods with the 7/16 arp rod bolts they have about 100 1/8 passes 2.200 large pin dia .990 small pin dia.
comp cam seral #t4450-10 429-460 roller intake .787 lift ex .769 duration intake 280 ex .292 lobe sep 112.cam has 25 passes and is good with a 300 shot of nos the car ran 5.30's. I also have the earson springs used with this cam off of a set of p51 heads.
600.00 shipping included
comp cam seral #t4450-10 429-460 roller intake .787 lift ex .769 duration intake 280 ex .292 lobe sep 112.cam has 25 passes and is good with a 300 shot of nos the car ran 5.30's. I also have the earson springs used with this cam off of a set of p51 heads.
600.00 shipping included
Larry T- Posts : 1076
Join date : 2009-01-08
Location : leicester,NC
Re: scat rods and cam
Volz 429 September 4th 2015, 1:43 am
I am interested in the cam only, would you sell it separate? If so, how much?
Volz 429- Posts : 3
Join date : 2015-09-04
Re: scat rods and cam
Larry T September 4th 2015, 1:00 pm
yes I will separate 200.00 for the cam shipping included.pm me with your info and how you want to pay for it.
Larry T- Posts : 1076
Join date : 2009-01-08
Location : leicester,NC
jaglov26- Posts : 5
Join date : 2015-01-15
Location : ga
butterbean- Posts : 676
Join date : 2012-12-25
Age : 60
Location : Naples, Florida
Re: scat rods and cam
Larry T September 5th 2015, 10:03 am
butterbean wrote:Looks like 600 total then -200.= 400.
that's correct shipping included paypal or money order will work for me.
Larry T- Posts : 1076
Join date : 2009-01-08
Location : leicester,NC
Re: scat rods and cam
Larry T September 9th 2015, 9:54 pm
make me an offer on the rods and springs I want to go to sgmp in 2 weeks 
Larry T- Posts : 1076
Join date : 2009-01-08
Location : leicester,NC
fordsoul- Posts : 1
Join date : 2015-10-17
Re: scat rods and cam
Larry T October 18th 2015, 1:44 pm
fordsoul wrote:do you still have the cam? if so I want it. 404-729-8530
i sold the cam thanks for asking.
I still have the 6.700 4340 forged h beam rods 250.00 "sale-sale-sale"
Larry T- Posts : 1076
Join date : 2009-01-08
Location : leicester,NC
dirt_worker- Posts : 535
Join date : 2009-04-03
Re: scat rods and cam
Larry T October 19th 2015, 10:23 pm
dirt_worker wrote:Which rod bolts are in these?
they were up graded to 7/16 arp 2000 bolts
Larry T- Posts : 1076
Join date : 2009-01-08
Location : leicester,NC
Similar topics» Scat Rods
» NEW Scat H-Beams F/S........
» END OF YEAR SHOP CLEANOUT
» New scat h-beab rods 6.8 .990 8740 bolts
» Scat 6.8 H beams rods
» NEW Scat H-Beams F/S........
» END OF YEAR SHOP CLEANOUT
» New scat h-beab rods 6.8 .990 8740 bolts
» Scat 6.8 H beams rods
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum