Finally ready to race
4 posters
Page 1 of 1
Finally ready to race
It's been two years since had the car to the track, going down to the race this coming Friday. Be the first outing with the p51 heads and roller cam. Old setup was D0VE-C heads and flat tappet cam with 11-1 compression. New engine is 14-1 compression, with 1150 dominator. Supposed to be 70*, no rain, 4300 ft. elevation.
glenevans- Posts : 315
Join date : 2013-01-22
Age : 60
Location : No. Utah
Re: Finally ready to race
Cant wait to hear your results!
dirt_worker- Posts : 535
Join date : 2009-04-03
Re: Finally ready to race
Thanks guys, hoping for low 10s, would be mid nines at near sea level. All steel, full body/interior '69 mustang fastback, N/A.
glenevans- Posts : 315
Join date : 2013-01-22
Age : 60
Location : No. Utah
Re: Finally ready to race
Good luck and have some fun
gmsmkr- Posts : 1364
Join date : 2014-06-22
Location : alabama
Re: Finally ready to race
glenevans wrote:Thanks guys, hoping for low 10s, would be mid nines at near sea level. All steel, full body/interior '69 mustang fastback, N/A.
There was/is a guy in Houston that goes by the nickname HopaLong (Clutch Got his foot) that has a 69 Stang with Aluminum CJ Heads Ported to the Max and 500 something inch's on the spray. It was a Street Car and he would not give up a number, but it must have been pretty low as he had a hard time getting anybody to race him. I think it will go pretty good from the spec.'s you mentioned. Looking forward to the results.
supervel45- Posts : 4499
Join date : 2013-09-04
Similar topics
» A few spy shots
» Engine Finally Ready To Drop Back In
» Truck is finally ready to start...Lots of pics
» getting ready for "the" race
» We are ready to race ....
» Engine Finally Ready To Drop Back In
» Truck is finally ready to start...Lots of pics
» getting ready for "the" race
» We are ready to race ....
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum