598 Rotating assembly

I was building a BBF engine and now have to sell due to medical issues
I have Diamond pistons 4.600 bore with upgrade tool steal wrist pins as well as gas ported and total seal rings These are setup for the A460 type head
Eagle rods with upgrade ARP bolts 6.800
Lunati 4.500 Forged Crank

I paid $1800 for pistons, $600 for rods, and $900 for crank plus shipping

I will take $2400 or best offer plus shipping my loss is your gain really wish I could build this but I cant price drop

Did i read that right...$1800 for pistons?

What compression on the pistons ? Double coated ?

dirt_worker wrote:Did i read that right...$1800 for pistons?

that is correct They cost me 1600 for pistons another 200 for upgrade wrist pins and another 200 or so for the rings. and some more for gas porting these suckers are the real deal works of art

John Myrick wrote:What compression on the pistons ?  Double coated ?

With the trick flow A460 heads 78cc? combustion chamber if I remember its been a few years that I was going to get it would be right about 14:1 I can take pictures of the pistons later when I get home from work but they look like pieces of art work too bad they couldn't be on display

Too much compression for me, thanks

buttnuttn8 wrote:

John Myrick wrote:What compression on the pistons ?  Double coated ?

With the trick flow A460 heads 78cc? combustion chamber if I remember its been a few years that I was going to get it would be right about 14:1 I can take pictures of the pistons later when I get home from work but they look like pieces of art work too bad they couldn't be on display

I'd be interested. If they work for my needs, we may be working a deal! And are the pistons coated or bare?

kjett wrote:

buttnuttn8 wrote:

John Myrick wrote:What compression on the pistons ?  Double coated ?

With the trick flow A460 heads 78cc? combustion chamber if I remember its been a few years that I was going to get it would be right about 14:1 I can take pictures of the pistons later when I get home from work but they look like pieces of art work too bad they couldn't be on display

I'd be interested. If they work for my needs, we may be working a deal! And are the pistons coated or bare?

How could I tell? sorry to ask such a dumb question but Im not really sure to be honest can you tell by a picture ? sorry again just not really sure

Yes post a pic up

Post pics of the parts and part numbers on the boxes. Especially the build info on the pistons. Are the gas ports on top or side? How far down are the top ring lands? What bolt upgrade on the rods? ARP2000 or L-19? What part number on the Total Seal rings? I'm interested if things can get worked out.

I will post pictures today after work. I got the pistons from either Charlee Evans or Lem I don't remember it is his specs from diamond. I can post picture of the pistons as well as build sheet and specs.

all I know is I opened up the box and they are beautiful and took them to machine shop to have them make me my engine. That was back in October of last year so they just been sitting and maybe a few guys drool on them.

anyways I shall post pictures

kjett wrote:I'd be interested. If they work for my needs, we may be working a deal! And are the pistons coated or bare?

You'll shoot your eye out kid lol.

sounds good. Just want to make sure it will work for what I'm wanting to do.

68formalGT wrote:

kjett wrote:I'd be interested. If they work for my needs, we may be working a deal! And are the pistons coated or bare?

You'll shoot your eye out kid lol.

I've been hanging tough with the little 488 deal and have been in the top 2 on every pass I've made this year, time to step it up and ensure I'm number 1 every pass!!!

kjett wrote:sounds good. Just want to make sure it will work for what I'm wanting to do.  

68formalGT wrote:

kjett wrote:I'd be interested. If they work for my needs, we may be working a deal! And are the pistons coated or bare?

You'll shoot your eye out kid lol.

I've been hanging tough with the little 488 deal and have been in the top 2 on every pass I've made this year, time to step it up and ensure I'm number 1 every pass!!!

I'm collecting parts for the same thing, 598-605. A-heads, Crower crank.

I was building an all motor mud truck engine If i remember it was 14:1 with a 78cc combustion chamber but its been over a year and I have moved so I misplaced all my written down information.
Pistons where purchased through Evans Ford with his build numbers as shown in pictures
The rods have the upgrade ARP L19 bolts
And the crank is the lunati 4.500 Forged 4340 internal balanced crank

This is a killer deal. I have $3200 in a set of pistons and rods with rings and wrist pins

Ace

powerstrokeace wrote:This is a killer deal. I have $3200 in a set of pistons and rods with rings and wrist pins

Ace

Thank you for the kind words

I am into this setup for over $3,300

willing to take $2,400

If still available can I get a phone number and your location?

Willing to sell just the crank and rods?

Sold
All I have left is MSD distrubtor Ford Racing timing chain and canton BBF in a mustang pan