MEMBERS AND MODERATOR PLEASE READ

MEMBERS AND MODERATOR PLEASE READ · 70429scj November 19th 2016, 3:37 pm

Guys i know we all try to save a buck or to when we can buying parts and search the internet doing so and find stuff thats clearance priced and maybe you need it or cant afford it right now. my thought was if you pass on something why not inform other members of what and where and it would be limited to 385 engine parts only. We share alot of important info and help one another trading parts and even giving them away why not new parts that are sometimes 1/2 price or better and its usually only good until there stock runs out most of the time. We have our own vendors here that give us more than fair deals on what they get there hands on at times and give us tech support out the wazzo but they may not be a supplier for the brand your looking for or you just want the best parts you can afford on your budget. This is a example when reseaching oil pan info from my earlier post summit had the wrong spec's and i went to the moroso website and just looked in there clearance page for grins and found all kinds of crap i needed marked down and i saved over a 150.00 on my order it was not all 385 parts but i think you guys get the idea but they also had spiral core blue plug wire sets at 50.00 down from 80 something and universal sets marked down to. My point is over the years just by doing that i have saved more than a dollar or two and we all use different web sites to buy from and its another way to help each other out. Now i dont know if its a good idea bad idea or its worth the mods trying to add a place to do it and how to moniter it do you just post part type & price and where or just a link to the vendors site so they might look for other items to. Just one of the things i thought might help the other members out. Its outa my hands now you guys decide and let bruno know what you think and as always thanks for you time!
Steve

another thought · 70429scj November 19th 2016, 3:48 pm

Could this also be done on rearend and trans parts and attached to the top of that specific topic page ? Most of use 9inch or 8.8 in the car side not sure about the truck stuff is why i asked and trans c4 c6 and glides not sure its even feasible just to cold to go out and work so my brains in overdrive!l!