Eliminator Products BBF RCV1 (Rotated Canted Valve) heads

Has anyone seen this head yet? I spoke with the cylinder head guy over at BES and he says, this head has flow potential like an a441 style head. Sounds promising but haven't heard much about them or seen them yet.

Haven t seen anything on them

Some stuff on Facebook about them and some pictures. One of the Visner x460 billet on one side of a block and the RCV on the other. A picture of Charlie E holding one, It's a big head! I'm wondering how they compare to the ProFiler 221's

The profilers don’t compare. The rcv (roatated canted valve) heads are in a league of their own. Capable of 620+ cfm.

I see where Bennet racing lists the head on their website, but no info.
Cost wise RCV wouldn't compare to Profiler 221.
It would compare more costwise to a billet head.
Be cheaper to go with a used set of Ford Hemi heads for same performance #s.

10.0 wrote:I see where Bennet racing lists the head on their website, but no info.
Cost wise RCV wouldn't compare to Profiler 221.
It would compare more costwise to a billet head.
Be cheaper to go with a used set of Ford Hemi heads for same performance #s.

Even after all the valvetrain parts are purchased or even a few spares for the Hemi? The picture I saw with the RCV and Visner heads on the same block looked like both were at about the same height.

Jody Gunter is the main man behind the RCV heads.
I believe he was also working with Mike Bowery @ Eliminator.

One of the Ford Racing Pro-Stock cylinder heads of just a few years ago was a "Rotated Canted Valve" head, (pretty much a Ford copy of the GM DRCE III head), and the other one offered was a Hemi head.

Randy, was that the E head or the jc50/jc51(?)?

68formalGT wrote:Randy, was that the E head or the jc50/jc51(?)?

NO, the later Pro-Stock head offerings are not the "E" head ... that "E" head was available more than 10 years ago.

The two latest Pro-Stock heads were offered in 2010, 2011 & 2012.
Part numbers were indeed;
 1.  M-6049-JC50 for the mirror image hemi chamber head
2.  M-6049-JC51 for the canted valve sequential chamber head