302 Hi Po Rods .Look Same As Boss 302 But Shorter .
4 posters
Page 1 of 1
302 Hi Po Rods .Look Same As Boss 302 But Shorter .
I Have a Set of 302 Hi Po Rods .
Look Same As .
Boss 302 But Shorter .
&
They Use Boss 302 Rod Bolts Too.
I have 5 Sets Of Boss 302 / 289 Hipo Rods .
& .
if you lay these Next to them .
You can Not Tell Them apart .
I don't remember the part Number .
I once was told that they were Trans Am Rod's ! .
Look Same As .
Boss 302 But Shorter .
&
They Use Boss 302 Rod Bolts Too.
I have 5 Sets Of Boss 302 / 289 Hipo Rods .
& .
if you lay these Next to them .
You can Not Tell Them apart .
I don't remember the part Number .
I once was told that they were Trans Am Rod's ! .
Last edited by GFPRACING on March 28th 2019, 10:11 pm; edited 1 time in total
GFPRACING- Posts : 38
Join date : 2009-10-17
Location : St. Joseph Mo.
Re: 302 Hi Po Rods .Look Same As Boss 302 But Shorter .
C80E forging number for the "short rod. In '68 there was "to be" a HiPo 302 to replace the HiPo 289. the short rods , C8ZE balancer and C8ZE HiPo heads were made in advance so engines would be ready for production. That engine was cancelled when Ford planned to introduce the Tunnel Port 302 but as we know it too was cancelled ( for "street production"). The Rods were sold off as Muscle Parts" instead of being scrapped. The balancers and heads were sold as 1289 HiPo replacements.
They were not to be confused with Trans Am rods which were LONGER and used special bearings
Are the rods for sale?
They were not to be confused with Trans Am rods which were LONGER and used special bearings
Are the rods for sale?
Last edited by gt350hr on February 8th 2019, 1:54 pm; edited 1 time in total
gt350hr- Posts : 662
Join date : 2014-08-20
Location : Anaheim , CA
Re: 302 Hi Po Rods .Look Same As Boss 302 But Shorter .
I don't think I am going to use them .
I would be Open to Offers ?
I Also Have .
5 = Sets of Boss 302 / 289 hipo heads also .
I would be Open to Offers ?
I Also Have .
5 = Sets of Boss 302 / 289 hipo heads also .
Last edited by GFPRACING on March 28th 2019, 10:12 pm; edited 2 times in total
GFPRACING- Posts : 38
Join date : 2009-10-17
Location : St. Joseph Mo.
Re: 302 Hi Po Rods .Look Same As Boss 302 But Shorter .
As GT350 said they were sold over the counter as Muscle Parts, and Ford sold a rod later in the 80's thru Ford Motorsport for 5.0's with the big bolts,I don't know if it is the same rod or forging number but wouldn't be surprised if it was.
427John- Posts : 86
Join date : 2018-03-19
Re: 302 Hi Po Rods .Look Same As Boss 302 But Shorter .
Are the rods for sale
Yes .
when i can get to them
GFPRACING- Posts : 38
Join date : 2009-10-17
Location : St. Joseph Mo.
Re: 302 Hi Po Rods .Look Same As Boss 302 But Shorter .
I’d be interested in the heads, what exactly you got? And where you at?
dfree383- BBF CONTRIBUTOR
- Posts : 14851
Join date : 2009-07-09
Location : Home Wif Da Wife.....
Re: 302 Hi Po Rods .Look Same As Boss 302 But Shorter .
I’d be interested in the heads, what exactly you got? And where you at?
they are not to were
I can get to them yet .
they are in storage .
I have to build a new shop before i can get to them .
they are not to were
I can get to them yet .
they are in storage .
I have to build a new shop before i can get to them .
GFPRACING- Posts : 38
Join date : 2009-10-17
Location : St. Joseph Mo.
Re: 302 Hi Po Rods .Look Same As Boss 302 But Shorter .
GF just PM me when you are ready. I would like to buy the "short" rods.
Randy
Randy
gt350hr- Posts : 662
Join date : 2014-08-20
Location : Anaheim , CA
Re: 302 Hi Po Rods .Look Same As Boss 302 But Shorter .
Bump .... GF I can still use the rods if you want to sell them
gt350hr- Posts : 662
Join date : 2014-08-20
Location : Anaheim , CA
Re: 302 Hi Po Rods .Look Same As Boss 302 But Shorter .
it will be some time next year befor i can get to any of my partsgt350hr wrote: Bump .... GF I can still use the rods if you want to sell them
GFPRACING- Posts : 38
Join date : 2009-10-17
Location : St. Joseph Mo.
Re: 302 Hi Po Rods .Look Same As Boss 302 But Shorter .
No problem , just remember there's a guy that wants to buy them, me.
Randy
Randy
gt350hr- Posts : 662
Join date : 2014-08-20
Location : Anaheim , CA
Similar topics
» boss 429 604 pistons rods.
» Is a Glide longer or shorter than a C4?
» my bucket list got shorter tonight!
» Tunnel Rams for the Street??
» boss fords boss 429 scj /cj's boss 351
» Is a Glide longer or shorter than a C4?
» my bucket list got shorter tonight!
» Tunnel Rams for the Street??
» boss fords boss 429 scj /cj's boss 351
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum