460 Dome Pistons

Hi, iam looking for a New or Good Used Set of 4.390 or 4.400 Dome pistons for a Conventional Head with a 3.850 stock stroke and 6.605 rod length with a optional pin size. What do you have ?

80CapriBigBlock wrote:Hi, iam looking for a new or good used set of 4.390 or 4.400 Dome pistons for 3.850 stock stroke and 6.605 rod length with a optional pin size. What do you have ?

Got that in a 429: New/not run BME 429 forged pistons, for 4.39" bore, ~0.030" dome, standard Cobra Jet valve layout, 1/16" ring set, 0.975" pins, on bronze bushed & re-sized D6VE rods.

80CapriBigBlock wrote:Hi, iam looking for a new or good used set of 4.390 or 4.400 Dome pistons for 3.850 stock stroke and 6.605 rod length with a optional pin size. What do you have ?

My cousin has some IIRC TRW Dome .030 Over for use with stock 3.85 Stroke and 6.605 rod length they are on Eagle H-Beam 6.605" Rods!! But they're in an assembled short block that has been ran before not sure if he would want to sell them or not!!If you don't find anything let me know and i could ask him

Sent you a PM Mark.

80CapriBigBlock wrote:Sent you a PM Mark.

I sent you a reply let me know if if got it!!

STILL LOOKING !

I have a set of 460 Bill Miller High Dome Pistons. Check pm !!

Iam Still Looking for 460 pin height pistons in a dome. .030-.040-.060-.080 oversize. New or Good Used.. What do you have ??

Been Looking and Still Looking !! What do you have before i purchase them from a store ??