707" Jon Kaase Hemi Ford
+6
56Tbird
BOSS 429
bruno
IcallhimGeorge
jones
Injected65
10 posters
Page 1 of 1
707" Jon Kaase Hemi Ford
707" Jon Kaase built Hemi Ford
11.7" C&C Cast block (4.900" BS)
Bryant 5.25" Crank
GRP Rods
4.628" CP Pistons
Kaase Hemi Keads
HRE Intake
2.400" Braswell Carbs
60mm Kaase Cam
Star Vacuum Pump
5-stage Peterson oil pump
Innovators West damper
Moroso segregated oil pan
3 passes on freshen (rods,rings,bearings)
Spare Used HRE Intake with shorter runners
Spare NEW CP Pistons
Motor is located at Jon Kaase Racing. This motor has the latest and greatest updates. Previously dyno'd at 1650 hp. Has been 6.60 @ 209 and 4.20 @ 168 in 2410# car.
The motor was ran in NHRA Competition Eliminator A/A as well as ADRL XPS. Also would be a great top sportsman motor.
Call Brad Waddle @ 785-452-2403 or Cliff @ Kaase's for more information.
$50,000
More Pictures here......
http://www.innovatorswest.com/images/Brad/Engine/
![707" Jon Kaase Hemi Ford PA040016](https://2img.net/h/www.innovatorswest.com/images/Brad/Engine/PA040016.JPG)
11.7" C&C Cast block (4.900" BS)
Bryant 5.25" Crank
GRP Rods
4.628" CP Pistons
Kaase Hemi Keads
HRE Intake
2.400" Braswell Carbs
60mm Kaase Cam
Star Vacuum Pump
5-stage Peterson oil pump
Innovators West damper
Moroso segregated oil pan
3 passes on freshen (rods,rings,bearings)
Spare Used HRE Intake with shorter runners
Spare NEW CP Pistons
Motor is located at Jon Kaase Racing. This motor has the latest and greatest updates. Previously dyno'd at 1650 hp. Has been 6.60 @ 209 and 4.20 @ 168 in 2410# car.
The motor was ran in NHRA Competition Eliminator A/A as well as ADRL XPS. Also would be a great top sportsman motor.
Call Brad Waddle @ 785-452-2403 or Cliff @ Kaase's for more information.
$50,000
More Pictures here......
http://www.innovatorswest.com/images/Brad/Engine/
Last edited by Injected65 on January 12th 2010, 5:15 pm; edited 1 time in total
Re: 707" Jon Kaase Hemi Ford
Nice car!
Are you going with a new power plant?
Are you going with a new power plant?
jones- Posts : 2230
Join date : 2008-12-02
Location : Philadelphia, MS.
Re: 707" Jon Kaase Hemi Ford
This one is already dyno'd Jonesy...that would save you a couple bucks.
Might shift the balance of the truck a little more toward strip than street though.![Shocked](https://2img.net/i/fa/i/smiles/icon_eek.gif)
![Laughing](https://2img.net/i/fa/i/smiles/icon_lol.gif)
Might shift the balance of the truck a little more toward strip than street though.
![Shocked](https://2img.net/i/fa/i/smiles/icon_eek.gif)
IcallhimGeorge- BBF CONTRIBUTOR
- Posts : 643
Join date : 2009-07-16
Age : 43
Location : St. George, SC
Re: 707" Jon Kaase Hemi Ford
Na, I was just giving him a bump.
jones- Posts : 2230
Join date : 2008-12-02
Location : Philadelphia, MS.
Re: 707" Jon Kaase Hemi Ford
how much for the pallet of extra virgin aluminum ![Wink](https://2img.net/i/fa/i/smiles/icon_wink.gif)
![Wink](https://2img.net/i/fa/i/smiles/icon_wink.gif)
_________________
coming soon x275 build .........
thanks to all my sponsors :
www.OakleyMotorsports.com
www.Induction-Solutions.com
www.bfevansraceparts.com
www.ultimateconverter.com
www.keithfulpmotorsports.com
Re: 707" Jon Kaase Hemi Ford
Jones - It's my bosses motor. He has is working with Kaase on a new 820" motor to run ARDL Xtreme Pro Stock with this next year. The 707" just didn't quite have the beans to run with the top dogs.
Bruno - That stack there is machined up and out the door by now. We do a lot of CNC machining for local industrial mfg's. Truckloads of aluminum plate and round bar with a few sticks of stressproof steel thrown in the mix for variety.
Chris
Bruno - That stack there is machined up and out the door by now. We do a lot of CNC machining for local industrial mfg's. Truckloads of aluminum plate and round bar with a few sticks of stressproof steel thrown in the mix for variety.
Chris
Re: 707" Jon Kaase Hemi Ford
id just like to know whos plug wires are on that engine?-thanks
BOSS 429- Posts : 2371
Join date : 2009-08-10
Location : Ill
Re: 707" Jon Kaase Hemi Ford
BOSS 429 wrote:id just like to know whos plug wires are on that engine?-thanks
MSD's I believe.
Re: 707" Jon Kaase Hemi Ford
How bout a left nut ? ![king](https://2img.net/i/fa/i/smiles/icon_king.png)
![king](https://2img.net/i/fa/i/smiles/icon_king.png)
56Tbird- BBF CONTRIBUTOR
- Posts : 5260
Join date : 2008-12-02
Age : 65
Location : Hawesville,Ky.
Re: 707" Jon Kaase Hemi Ford
I'll counter that offer with Both Nuts........
Bump For Ya.
![Laughing](https://2img.net/i/fa/i/smiles/icon_lol.gif)
![Laughing](https://2img.net/i/fa/i/smiles/icon_lol.gif)
Bump For Ya.
dfree383- BBF CONTRIBUTOR
- Posts : 14832
Join date : 2009-07-09
Location : Home Wif Da Wife.....
Re: 707" Jon Kaase Hemi Ford
I've been informed that he is well stocked with nuts at the moment and any more than 2 might arouse some suspicion with the wife.
![Very Happy](https://2img.net/i/fa/i/smiles/icon_biggrin.png)
![affraid](https://2img.net/i/fa/i/smiles/affraid.gif)
![Very Happy](https://2img.net/i/fa/i/smiles/icon_biggrin.png)
Re: 707" Jon Kaase Hemi Ford
Damn it ...according to the calculator , that beast would run 4.40 in the 1/8
That's fast enough to put Bruno on the trailer
Super nice looking engine!!
![affraid](https://2img.net/i/fa/i/smiles/affraid.gif)
![Basketball](https://2img.net/i/fa/i/smiles/icon_basketball.gif)
![king](https://2img.net/i/fa/i/smiles/icon_king.png)
56Tbird- BBF CONTRIBUTOR
- Posts : 5260
Join date : 2008-12-02
Age : 65
Location : Hawesville,Ky.
Re: 707" Jon Kaase Hemi Ford
56Tbird wrote:Damn it ...according to the calculator , that beast would run 4.40 in the 1/8That's fast enough to put Bruno on the trailer
![]()
Super nice looking engine!!
Thats Fast enough that Bruno wouldn't bother showing up !!!
![Laughing](https://2img.net/i/fa/i/smiles/icon_lol.gif)
![Laughing](https://2img.net/i/fa/i/smiles/icon_lol.gif)
dfree383- BBF CONTRIBUTOR
- Posts : 14832
Join date : 2009-07-09
Location : Home Wif Da Wife.....
Re: 707" Jon Kaase Hemi Ford
dfree383 wrote:56Tbird wrote:Damn it ...according to the calculator , that beast would run 4.40 in the 1/8That's fast enough to put Bruno on the trailer
![]()
Super nice looking engine!!
Thats Fast enough that Bruno wouldn't bother showing up !!!![]()
Hell, he didn't make it to the tech seminar, why would he come to Windy Hollow?
![Laughing](https://2img.net/i/fa/i/smiles/icon_lol.gif)
![Wink](https://2img.net/i/fa/i/smiles/icon_wink.gif)
Nevs- BBF CONTRIBUTOR
- Posts : 2724
Join date : 2009-02-07
Age : 70
Location : NW Iowa(Odebolt)
Re: 707" Jon Kaase Hemi Ford
Don't have too worry about Nick not showing up at the Bash. He'll be there win or lose like me. Because it's a Blast, and we get to all hangout and have a good time. If the Lord willing, I will be at all of them that's held as long as it stay's where it's at. ![cheers](https://2img.net/i/fa/i/smiles/icon_cheers.png)
![cheers](https://2img.net/i/fa/i/smiles/icon_cheers.png)
bbf-falcon- Posts : 8995
Join date : 2008-12-03
Location : Jackson, Ohio
Re: 707" Jon Kaase Hemi Ford
This motor is still available. Offers will be entertained as long as they are reasonable ![Smile](https://2img.net/i/fa/i/smiles/icon_smile.gif)
Thanks,
Chris
![Smile](https://2img.net/i/fa/i/smiles/icon_smile.gif)
Thanks,
Chris
Re: 707" Jon Kaase Hemi Ford
man i wish i could afford this...but i have one question the block u said it's cast is it cast aluminum?? sorry if it's a stupid question...eric
fatal addiction- Posts : 433
Join date : 2010-03-01
![-](https://2img.net/i/empty.gif)
» Ford 787" Hemi (BOSS 429)
» 772 Ford 5" bore spacing Hemi for sale
» 2003 ENGINE MASTERS WINNER JON KAASE BBF FORD 468" SCJ
» 2003 ENGINE MASTERS WINNER JON KAASE BBF FORD 468" SCJ - $10,500 Firm
» Ford Boss 429 "HP" Nascar Block - $1800
» 772 Ford 5" bore spacing Hemi for sale
» 2003 ENGINE MASTERS WINNER JON KAASE BBF FORD 468" SCJ
» 2003 ENGINE MASTERS WINNER JON KAASE BBF FORD 468" SCJ - $10,500 Firm
» Ford Boss 429 "HP" Nascar Block - $1800
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|