Found an old picture
2 posters
Page 1 of 1
Found an old picture
Before
I found this while I was searching photobucket for tow rig pics. It's my street legal 1979 Mustang. This picture was snapped about 5 seconds befor the number 8 rod exited the oil pan. We had a year end burnout contest, and I held it at 6500 for the required 15 seconds, then was going to giver across the line, but when I hit the fresh water, the rpm jumped up to 7000, it ticked the rev limiter, and bam! It broke the cam and timing chain, but the stock pushrods folded up nicely and save the valves and heads, and the wayward rod took the heads off of 2 oil pan bolts and missed the block. This was back in 1996, and I'm still running the motor today.
After
I found this while I was searching photobucket for tow rig pics. It's my street legal 1979 Mustang. This picture was snapped about 5 seconds befor the number 8 rod exited the oil pan. We had a year end burnout contest, and I held it at 6500 for the required 15 seconds, then was going to giver across the line, but when I hit the fresh water, the rpm jumped up to 7000, it ticked the rev limiter, and bam! It broke the cam and timing chain, but the stock pushrods folded up nicely and save the valves and heads, and the wayward rod took the heads off of 2 oil pan bolts and missed the block. This was back in 1996, and I'm still running the motor today.
After
John I.- BBF CONTRIBUTOR
- Posts : 207
Join date : 2009-08-08
Age : 68
Location : Patricia, Alberta
Re: Found an old picture
John I. wrote:Before
I found this while I was searching photobucket for tow rig pics. It's my street legal 1979 Mustang. This picture was snapped about 5 seconds befor the number 8 rod exited the oil pan. We had a year end burnout contest, and I held it at 6500 for the required 15 seconds, then was going to giver across the line, but when I hit the fresh water, the rpm jumped up to 7000, it ticked the rev limiter, and bam! It broke the cam and timing chain, but the stock pushrods folded up nicely and save the valves and heads, and the wayward rod took the heads off of 2 oil pan bolts and missed the block. This was back in 1996, and I'm still running the motor today.
After
John, I hope you have grown up a bit
bbf-falcon- Posts : 8995
Join date : 2008-12-03
Location : Jackson, Ohio
Re: Found an old picture
I'd still do it! But I have h-beams now...
John I.- BBF CONTRIBUTOR
- Posts : 207
Join date : 2009-08-08
Age : 68
Location : Patricia, Alberta
Similar topics
» Just found a new picture of the 58
» Check out this group of ruffians (EMC Thread)
» Can you picture this......
» Picture....................................................
» Picture
» Check out this group of ruffians (EMC Thread)
» Can you picture this......
» Picture....................................................
» Picture
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum