new 460 with aluminum heads
4 posters
Page 1 of 1
new 460 with aluminum heads
i'm selling my engine. it is fresh from the machine shop. i just put eagle h-beam rods in it and had the crank blue printed and rebalanced. it has srp flat top pistons that are .080 over and gapless rings. its a d1ve block with the distributor oiling mod and oil passages drilled out to 9/16 and drain holes in the front of the valley. it has victor cj heads with .100 longer valves which are manley racemasters, 2.19-1.76, titanium retainers, crane springs, 10 degree locks. they have been smoothed up a little but thats it. doug has seen them if you need verification. it has a lunati voodoo solid roller cam (pn 64033) and comp endurex lifters, comp pushrods and comp energizer rockers and jomar stud girdles and a crane billet timing chain set. on top it has a untouched motorsport intake, 1 inch hvh super sucker space and braswell 850 ms carb. i just went through the carb and put about 120 bucks into it. msd pro billet mechanical advance dizzy and moroso ultra 40 wires. the engine is not yet assembled, but it can be . i'm asking 6,000 for the motor assembled, thats with a cane oil pump and electric water pump. if someone wants it unassembled, then we can discuss that. i forgot, it has arp studs throughout the engine and a moroso fox body road race oil pan.
i will have pics up later tonight, i might have to send them to doug and have him post them if i cant figure out how to.
i will have pics up later tonight, i might have to send them to doug and have him post them if i cant figure out how to.
reeseracing23- Posts : 70
Join date : 2010-05-28
Age : 41
Location : montana
Re: new 460 with aluminum heads
[img][/img][img][/img][url=]
reeseracing23- Posts : 70
Join date : 2010-05-28
Age : 41
Location : montana
Re: new 460 with aluminum heads
Still have the heads and intake? I have a 514 race engine with DOVE heads and would like some bolt on's.
russhoodins@yahoo.com
russhoodins@yahoo.com
Re: new 460 with aluminum heads
russhoodins@yahoo.com[/quote[/email]]Moodyblues wrote:Still have the heads and intake? I have a 514 race engine with DOVE heads and would like some bolt on's.
[email=russhoodins@yahoo.com
why not put these heads on the 514?
BOSS 429- Posts : 2372
Join date : 2009-08-10
Location : Ill
Re: new 460 with aluminum heads
BOSS 429 wrote:russhoodins@yahoo.com[/quote[/email]]Moodyblues wrote:Still have the heads and intake? I have a 514 race engine with DOVE heads and would like some bolt on's.
[email=russhoodins@yahoo.com
why not put these heads on the 514?
Looking into it.
Re: new 460 with aluminum heads
The stuff is SOLD!!!!!! Justin can't get to a computer so I told him I'd post it up for him.
ThndrChkn- Posts : 2216
Join date : 2008-12-04
Age : 57
Location : Helena, Montana
Similar topics
» FS: New set of Ford M-6049-SCJA aluminum cylinder heads.. HEADS SOLD, Thx
» "Bolt On" 460 aluminum heads? Existing engine, thinking about new heads.
» what aluminum heads would be better than max effort dove heads.
» Looking for aluminum heads
» aluminum heads
» "Bolt On" 460 aluminum heads? Existing engine, thinking about new heads.
» what aluminum heads would be better than max effort dove heads.
» Looking for aluminum heads
» aluminum heads
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum