I heard of a pair of A429's getting MAX ported at a shop in Kentucky Mmmmm:)
+11
738drvr
Tennessee Bullitt
schmitty
QtrWarrior
the Coug
LivermoreDave
c.evans
Lem Evans
dfree383
514Fox87
nuclearcobra
15 posters
Page 2 of 2
Page 2 of 2 • 1, 2
Re: I heard of a pair of A429's getting MAX ported at a shop in Kentucky Mmmmm:)
nuclearcobra wrote:I will one day but for now i can only afford to move more air from a little blue bottle
How many of the blue bottle refills do you not have to buy to equal some port work?
jbozzelle- Posts : 3705
Join date : 2009-08-10
Age : 50
Location : New Orleans
Re: I heard of a pair of A429's getting MAX ported at a shop in Kentucky Mmmmm:)
about 35 with gaskets and no port jobs gonna equal the bottle anyway never the less i will have my heads ported one day thats been the plan from day one thats why i bought the mafia intake to go with a pair of max ported scj's , and then i would still try the bottle ya can never have to much fun I know my buddy Melvyn and even tho he's spending all this moola for portin,pistons,roller cam and more he's gonna try the bottle cause he's just whacked like that damn hp junkys
nuclearcobra- BBF CONTRIBUTOR
- Posts : 1385
Join date : 2009-08-16
Location : Delaware Coast
Re: I heard of a pair of A429's getting MAX ported at a shop in Kentucky Mmmmm:)
Melvyn,
Got some good results today on the flow bench. They'll be ready for you to pick up when you come in for the Winter Tech Seminar.
Charlie
Got some good results today on the flow bench. They'll be ready for you to pick up when you come in for the Winter Tech Seminar.
Charlie
c.evans- BBF VENDOR SPONSOR
- Posts : 2260
Join date : 2008-12-03
Re: I heard of a pair of A429's getting MAX ported at a shop in Kentucky Mmmmm:)
jbozzelle wrote:nuclearcobra wrote:I will one day but for now i can only afford to move more air from a little blue bottle
How many of the blue bottle refills do you not have to buy to equal some port work?
I fill my own bottles for less than 2 bucks a pound, using less than 1 pound a run.............it'll go a long ways lol.
richter69- Posts : 13649
Join date : 2008-12-02
Age : 53
Location : In the winners circle
Re: I heard of a pair of A429's getting MAX ported at a shop in Kentucky Mmmmm:)
70-75 passes or so give or take...richter69 wrote:jbozzelle wrote:nuclearcobra wrote:I will one day but for now i can only afford to move more air from a little blue bottle
How many of the blue bottle refills do you not have to buy to equal some port work?
I fill my own bottles for less than 2 bucks a pound, using less than 1 pound a run.............it'll go a long ways lol.
Re: I heard of a pair of A429's getting MAX ported at a shop in Kentucky Mmmmm:)
Yep been fillin my own for years too the shops charge way to much at 60 bucks and some shops are 70-75 to fill i just laugh at them and get the big bottle delivered.richter69 wrote:jbozzelle wrote:nuclearcobra wrote:I will one day but for now i can only afford to move more air from a little blue bottle
How many of the blue bottle refills do you not have to buy to equal some port work?
I fill my own bottles for less than 2 bucks a pound, using less than 1 pound a run.............it'll go a long ways lol.
nuclearcobra- BBF CONTRIBUTOR
- Posts : 1385
Join date : 2009-08-16
Location : Delaware Coast
Re: I heard of a pair of A429's getting MAX ported at a shop in Kentucky Mmmmm:)
hell i sell enough to pay for what little I use lol.
richter69- Posts : 13649
Join date : 2008-12-02
Age : 53
Location : In the winners circle
Re: I heard of a pair of A429's getting MAX ported at a shop in Kentucky Mmmmm:)
Got one of the heads back from Uncle Charlie and I must say I'm impressed! Class work all the way. Having gotten a set of heads that someone had been into before him and only flowed 198cfm on the ex. from .500 lift and not a bit more to .700. He worked his magic. I am not going to post the numbers just to keep the flowbench racers, from causing headaches for Uncle Charlie. That being said these heads still flow over 300cfm @.400 lift and over 330 @.500 lift. and climb nicely from there. Even with a messed up short turn on the ex. they flow very well.
Bottom line is these heads are going to fly on my little 466 with the cam Lem has spec. Have no worrys sending Uncle Charlie your stuff.
Thanks again Uncle Charlie for your help.
Bottom line is these heads are going to fly on my little 466 with the cam Lem has spec. Have no worrys sending Uncle Charlie your stuff.
Thanks again Uncle Charlie for your help.
514Fox87- Posts : 436
Join date : 2009-08-08
Age : 58
Location : Harrington DE
Re: I heard of a pair of A429's getting MAX ported at a shop in Kentucky Mmmmm:)
514Fox87 wrote:Got one of the heads back from Uncle Charlie and I must say I'm impressed! Class work all the way. Having gotten a set of heads that someone had been into before him and only flowed 198cfm on the ex. from .500 lift and not a bit more to .700. He worked his magic. I am not going to post the numbers just to keep the flowbench racers, from causing headaches for Uncle Charlie. That being said these heads still flow over 300cfm @.400 lift and over 330 @.500 lift. and climb nicely from there. Even with a messed up short turn on the ex. they flow very well.
Bottom line is these heads are going to fly on my little 466 with the cam Lem has spec. Have no worrys sending Uncle Charlie your stuff.
Thanks again Uncle Charlie for your help.
i can assure you, you or whomever else wont and will not have those problems on this site.
_________________
coming soon x275 build .........
thanks to all my sponsors :
www.OakleyMotorsports.com
www.Induction-Solutions.com
www.bfevansraceparts.com
www.ultimateconverter.com
www.keithfulpmotorsports.com
Re: I heard of a pair of A429's getting MAX ported at a shop in Kentucky Mmmmm:)
Thank you for the kind words Mr. 514Fox87, I found another good box, and your second head is on the way.
Uncle Charlie
Uncle Charlie
c.evans- BBF VENDOR SPONSOR
- Posts : 2260
Join date : 2008-12-03
Page 2 of 2 • 1, 2
Similar topics
» Max effort A429s
» Setting up new shop What shop equipemnt?
» WTT: Ported D0VE's for ported D3's
» Mmmmm.... venison
» anybody heard from
» Setting up new shop What shop equipemnt?
» WTT: Ported D0VE's for ported D3's
» Mmmmm.... venison
» anybody heard from
Page 2 of 2
Permissions in this forum:
You cannot reply to topics in this forum