what head???
5 posters
Page 1 of 1
what head???
butterbean March 30th 2015, 11:42 am
I met a guy today that said he has a set of aluminum BBF heads for sale and he could only tell me that the heads have SVO raised up on them and did not know anything else about them, does anyone know what they may be????
butterbean- Posts : 676
Join date : 2012-12-25
Age : 60
Location : Naples, Florida
glenevans- Posts : 315
Join date : 2013-01-22
Age : 60
Location : No. Utah
Re: what head???
kim March 31st 2015, 6:19 pm
Odds are razed SVO would be the aluminum cobra jets. Not a bad little head. Kaase did a slifht tweak on them for ford. Then ford screwed him over and the world got the P51 heads.
kim- Posts : 700
Join date : 2009-06-27
Location : Tucson AZ
Re: what head???
69F100 April 1st 2015, 1:48 am
My A429 heads has the SVO on them it is at the back above the exhaust port and the head numbers is at the above the front exhaust port
This id on the front and rear of each head
This id on the front and rear of each head
69F100- BBF CONTRIBUTOR
- Posts : 5386
Join date : 2009-01-04
Age : 58
Location : Irwinville Ga.
Re: what head???
butterbean April 1st 2015, 11:45 am
thanks everyone, but I was hoping that he has a set of A460's on the engine 
butterbean- Posts : 676
Join date : 2012-12-25
Age : 60
Location : Naples, Florida
A460 heads
460pulling April 1st 2015, 11:56 am
My motorsport A460 heads have Motorsport on the ends. like this https://2img.net/r/ihimg/a/img820/5720/img20130122184153.jpg
hope this helps. I dont know about the SVO
hope this helps. I dont know about the SVO
460pulling- Posts : 249
Join date : 2012-07-23
Location : southwestern,pennsylvania
Similar topics» Biggest intake seat insert a Dove head will accept, trying to save head from dropped valve.
» Will Jesel Rockers From A Yates Head Work On A C-460 Cylinder head?
» coolant leak between head and block at head bolt location.
» P-51 Head's /Head Studs/pushrods (SOLD)
» P51 Head HP gain after head port
» Will Jesel Rockers From A Yates Head Work On A C-460 Cylinder head?
» coolant leak between head and block at head bolt location.
» P-51 Head's /Head Studs/pushrods (SOLD)
» P51 Head HP gain after head port
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum