Aluminium Blocks 4.6150 Bore
3 posters
Page 1 of 1
Aluminium Blocks 4.6150 Bore
WDR460a April 28th 2017, 9:45 pm
Hi All,
Being in Australia aluminium blocks are not too easy to come by.
My current block is a water jacketed CandC via Jon Kaase.
Asking advice on whether any forum members deals with these or similar blocks (BF Evans?) , or should I go direct to CandC (contact?) or via Cliff at JKRE?
Any advice welcome.
Current combo went 7.4 with a 1.054 60' , foot braked C6 . Still greedy
Being in Australia aluminium blocks are not too easy to come by.
My current block is a water jacketed CandC via Jon Kaase.
Asking advice on whether any forum members deals with these or similar blocks (BF Evans?) , or should I go direct to CandC (contact?) or via Cliff at JKRE?
Any advice welcome.
Current combo went 7.4 with a 1.054 60' , foot braked C6 . Still greedy
Last edited by WDR460a on April 29th 2017, 2:27 am; edited 2 times in total (Reason for editing : Forgot to sign off.)
WDR460a- Posts : 3
Join date : 2017-04-11
Age : 59
Location : West Australia
Re: Aluminium Blocks 4.6150 Bore
10.0 April 29th 2017, 1:35 am
Had goodluck with C and C, they can do some of the machine work there too, clearance for crank and rods, rough bore, linehone, needle cam bearings, etc.
10.0- Posts : 54
Join date : 2011-04-23
Re: Aluminium Blocks 4.6150 Bore
WDR460a April 29th 2017, 2:30 am
Thanks 10.0 , my current block came from candc via JKRE . They are OK to deal with direct?
WDR460a- Posts : 3
Join date : 2017-04-11
Age : 59
Location : West Australia
Re: Aluminium Blocks 4.6150 Bore
10.0 April 29th 2017, 4:00 am
Yeah Carroll Carter is the guy making the C and C blocks
They have a website C and C Motorsports.
They have a website C and C Motorsports.
10.0- Posts : 54
Join date : 2011-04-23
Re: Aluminium Blocks 4.6150 Bore
dfree383 April 29th 2017, 6:44 am
Yes C&C is fine to deal with direct.
dfree383- BBF CONTRIBUTOR
- Posts : 14851
Join date : 2009-07-09
Location : Home Wif Da Wife.....
Similar topics» timing chain for aligned bore blocks?
» Cometic 4.400 bore gaskets on 4.390 bore block ,will it work ?
» Ar aluminium block Question..
» WTB - Aluminium Heads
» Mechanical aluminium water pump
» Cometic 4.400 bore gaskets on 4.390 bore block ,will it work ?
» Ar aluminium block Question..
» WTB - Aluminium Heads
» Mechanical aluminium water pump
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum