What Are 289 Hipo Heads Worth
+6
jbozzelle
BBFTorino
gt350hr
rmcomprandy
AZFairlane
GFPRACING
10 posters
Page 1 of 1
What Are 289 Hipo Heads Worth
GFPRACING Tue 5 Feb - 15:48
I have 2 sets of 289 Hi-Po Heads . What Are they Worth ? ? ?
Screw in Studs. Cast in Spring Pockets .
I Don't think . I am Ever going to use them .
They are in storage . Were I can not get to My stuff . Right Now .
I have to build a New Shop Firs t! . Before I can Get to Any of it !.
Then All of the Following I Have Will Be for Sale .
1 ={Original Parker Funnel Web sbf Intake}Prototypes {Only 7 Were Made} I have had it over 30 Years . Story Behind it .
2 = Set of 289 Hipo Heads
6 = Sets of 289 / Boss 302 Rod's .
6 to 8 = 289 4bbl Cast Iron Intakes .
4 0r 5 = 302 4bbl Cast Iron Intakes .
1 = St of 302 Hipo Rods { Just like the 289 hipo / Boss } But Shorter .
5 0r 6 = Boss 302 Cranks
1 = 351c Holley Strip Dominator Intake .
1 = New 351c 2x4 Tunnel Ram .
1 = 351c Billet Strocker Crank .
1 = 351c Racing Short Block .
1 = 351w Victory Jr Intake .
1 = Set of 351w trw Dome Piston's .
1 = sbf Lakewood Blow Prof.
1 = Hurst 4 Lever Lighting Rod Shifter .
1 = sbf Inline 2x4 intake With 2 450 Holley carbs { This intake Excepts 2 600 holleys in line }
1964 ford Fairlane 500
2dr. Hardtop .
99.9% Rust Free.
Bucket Seats .
74,000 real Miles .
Factory 289 4 bbl .
Factory 4 Speed .
Factory 4 Speed Console .
But it Been Up Graded to .
351 w .
Flat top pistons.
3 0r 4 size over stock Cam .
Alum Intake .
600 holley .
Top Loader 4 Speed .
4.56 Gears .
No Headers .
Car has Never been cut on .
Still Has Original Factory Dash { Never Been Cut on }.
Came from Georgia
I have Had it Sinces 2003 .
Will Add More as I remember Wit i Have ! .
Screw in Studs. Cast in Spring Pockets .
I Don't think . I am Ever going to use them .
They are in storage . Were I can not get to My stuff . Right Now .
I have to build a New Shop Firs t! . Before I can Get to Any of it !.
Then All of the Following I Have Will Be for Sale .
1 ={Original Parker Funnel Web sbf Intake}Prototypes {Only 7 Were Made} I have had it over 30 Years . Story Behind it .
2 = Set of 289 Hipo Heads
6 = Sets of 289 / Boss 302 Rod's .
6 to 8 = 289 4bbl Cast Iron Intakes .
4 0r 5 = 302 4bbl Cast Iron Intakes .
1 = St of 302 Hipo Rods { Just like the 289 hipo / Boss } But Shorter .
5 0r 6 = Boss 302 Cranks
1 = 351c Holley Strip Dominator Intake .
1 = New 351c 2x4 Tunnel Ram .
1 = 351c Billet Strocker Crank .
1 = 351c Racing Short Block .
1 = 351w Victory Jr Intake .
1 = Set of 351w trw Dome Piston's .
1 = sbf Lakewood Blow Prof.
1 = Hurst 4 Lever Lighting Rod Shifter .
1 = sbf Inline 2x4 intake With 2 450 Holley carbs { This intake Excepts 2 600 holleys in line }
1964 ford Fairlane 500
2dr. Hardtop .
99.9% Rust Free.
Bucket Seats .
74,000 real Miles .
Factory 289 4 bbl .
Factory 4 Speed .
Factory 4 Speed Console .
But it Been Up Graded to .
351 w .
Flat top pistons.
3 0r 4 size over stock Cam .
Alum Intake .
600 holley .
Top Loader 4 Speed .
4.56 Gears .
No Headers .
Car has Never been cut on .
Still Has Original Factory Dash { Never Been Cut on }.
Came from Georgia
I have Had it Sinces 2003 .
Will Add More as I remember Wit i Have ! .
Last edited by GFPRACING on Tue 12 Feb - 17:28; edited 4 times in total
GFPRACING- Posts : 38
Join date : 2009-10-17
Location : St. Joseph Mo.
Re: What Are 289 Hipo Heads Worth
AZFairlane Fri 8 Feb - 4:58
What casting numbers do you have? C3-C7
What casting dates do you have?
In the top corner of the heads, just outside the valve cover rail, there will be a two digit number. What numbers do you have?
Thanks,
Joe
What casting dates do you have?
In the top corner of the heads, just outside the valve cover rail, there will be a two digit number. What numbers do you have?
Thanks,
Joe
AZFairlane- BBF CONTRIBUTOR
- Posts : 573
Join date : 2009-02-02
Age : 71
Location : Glendale, AZ
Re: What Are 289 Hipo Heads Worth
rmcomprandy Fri 8 Feb - 11:17
Not much ... I just scrapped a good C5OE.
rmcomprandy- Posts : 6155
Join date : 2008-12-02
Location : Roseville, Michigan -
Re: What Are 289 Hipo Heads Worth
gt350hr Fri 8 Feb - 13:35
Randy ,
Don't do that again! I'm always looking for orphans
BTW EM parts should be on the way next week
RG
Don't do that again! I'm always looking for orphans
BTW EM parts should be on the way next week
RG
gt350hr- Posts : 662
Join date : 2014-08-20
Location : Anaheim , CA
Re: What Are 289 Hipo Heads Worth
rmcomprandy Fri 8 Feb - 14:52
gt350hr wrote: Randy ,
Don't do that again! I'm always looking for orphans
BTW EM parts should be on the way next week
RG
It might still be in the scrap metal bin ... I will look on Monday.
Getting it to you will be a different story.
rmcomprandy- Posts : 6155
Join date : 2008-12-02
Location : Roseville, Michigan -
Re: What Are 289 Hipo Heads Worth
BBFTorino Fri 8 Feb - 15:40
My old boss threw away a complete Bud Moore Trans Am intake manifold for a Boss 351 / Cleveland 4V with the removable top (this one had the single Dominator flange), in the scrap bin.
I went and picked it out of the scrap bin, and sold it shortly afterwards for $800
I went and picked it out of the scrap bin, and sold it shortly afterwards for $800
BBFTorino- Posts : 999
Join date : 2015-12-31
GFPRACING- Posts : 38
Join date : 2009-10-17
Location : St. Joseph Mo.
Re: What Are 289 Hipo Heads Worth
gt350hr Fri 8 Feb - 19:33
rmcomprandy wrote:gt350hr wrote: Randy ,
Don't do that again! I'm always looking for orphans
BTW EM parts should be on the way next week
RG
It might still be in the scrap metal bin ... I will look on Monday.
Getting it to you will be a different story.
I can figure something out to get it picked up. THANKS Randy!
gt350hr- Posts : 662
Join date : 2014-08-20
Location : Anaheim , CA
Re: What Are 289 Hipo Heads Worth
BBFTorino Fri 8 Feb - 22:40
Well, that was back in like 1995 or so....GFPRACING wrote:&
You Sold it too Cheap
BBFTorino- Posts : 999
Join date : 2015-12-31
Re: What Are 289 Hipo Heads Worth
jbozzelle Mon 11 Feb - 22:06
gt350hr wrote: Randy ,
Don't do that again! I'm always looking for orphans
BTW EM parts should be on the way next week
RG
You looking for regular 289 heads or just HiPo stuff? I have about 3 sets I think... Regular 2 bbl castings. Have a few cranks and a shortblock or two, maybe a complete engine...
jbozzelle- Posts : 3705
Join date : 2009-08-10
Age : 50
Location : New Orleans
dfree383- BBF CONTRIBUTOR
- Posts : 14851
Join date : 2009-07-09
Location : Home Wif Da Wife.....
Re: What Are 289 Hipo Heads Worth
gt350hr Tue 12 Feb - 15:45
jbozzelle wrote:gt350hr wrote: Randy ,
Don't do that again! I'm always looking for orphans
BTW EM parts should be on the way next week
RG
You looking for regular 289 heads or just HiPo stuff? I have about 3 sets I think... Regular 2 bbl castings. Have a few cranks and a shortblock or two, maybe a complete engine...
I have some die hards that still want the old 2889 hi po heads for restorations. The non hipo press in stud heads are everywhere out here . Blocks are getting a little tougher in the pre '66 date codes. Thanks for th offers
Randy
gt350hr- Posts : 662
Join date : 2014-08-20
Location : Anaheim , CA
Re: What Are 289 Hipo Heads Worth
BOSS 429 Sun 17 Feb - 21:47
GFPRACING wrote:I have 2 sets of 289 Hi-Po Heads . What Are they Worth ? ? ?
Screw in Studs. Cast in Spring Pockets .
I Don't think . I am Ever going to use them .
They are in storage . Were I can not get to My stuff . Right Now .
I have to build a New Shop Firs t! . Before I can Get to Any of it !.
Then All of the Following I Have Will Be for Sale .
1 ={Original Parker Funnel Web sbf Intake}Prototypes {Only 7 Were Made} I have had it over 30 Years . Story Behind it .
2 = Set of 289 Hipo Heads
6 = Sets of 289 / Boss 302 Rod's .
6 to 8 = 289 4bbl Cast Iron Intakes .
4 0r 5 = 302 4bbl Cast Iron Intakes .
1 = St of 302 Hipo Rods { Just like the 289 hipo / Boss } But Shorter .
5 0r 6 = Boss 302 Cranks
1 = 351c Holley Strip Dominator Intake .
1 = New 351c 2x4 Tunnel Ram .
1 = 351c Billet Strocker Crank .
1 = 351c Racing Short Block .
1 = 351w Victory Jr Intake .
1 = Set of 351w trw Dome Piston's .
1 = sbf Lakewood Blow Prof.
1 = Hurst 4 Lever Lighting Rod Shifter .
1 = sbf Inline 2x4 intake With 2 450 Holley carbs { This intake Excepts 2 600 holleys in line }
1964 ford Fairlane 500
2dr. Hardtop .
99.9% Rust Free.
Bucket Seats .
74,000 real Miles .
Factory 289 4 bbl .
Factory 4 Speed .
Factory 4 Speed Console .
But it Been Up Graded to .
351 w .
Flat top pistons.
3 0r 4 size over stock Cam .
Alum Intake .
600 holley .
Top Loader 4 Speed .
4.56 Gears .
No Headers .
Car has Never been cut on .
Still Has Original Factory Dash { Never Been Cut on }.
Came from Georgia
I have Had it Sinces 2003 .
Will Add More as I remember Wit i Have ! .
700ish for 67 and up
more for the older ones. this price is for a nice set,complete
BOSS 429- Posts : 2372
Join date : 2009-08-10
Location : Ill
JohnSwenson- Posts : 20
Join date : 2009-08-11
Re: What Are 289 Hipo Heads Worth
GFPRACING Wed 20 Feb - 12:47
$10,000.00
Last edited by GFPRACING on Wed 20 Feb - 12:49; edited 1 time in total
GFPRACING- Posts : 38
Join date : 2009-10-17
Location : St. Joseph Mo.
Re: What Are 289 Hipo Heads Worth
GFPRACING Wed 20 Feb - 12:47
JohnSwenson wrote:What do you want for the 64 Fairlane? $10,000.00
John
940/631-1152
GFPRACING- Posts : 38
Join date : 2009-10-17
Location : St. Joseph Mo.
Re: What Are 289 Hipo Heads Worth
JohnSwenson Mon 25 Feb - 18:59
GFP, can you give me a call. Have questions about the Fairlane.
John
940/631-1152
John
940/631-1152
JohnSwenson- Posts : 20
Join date : 2009-08-11
Re: What Are 289 Hipo Heads Worth
spike302 Fri 5 Jul - 6:39
Am looking for some C3 Hipo heads with 3C or 3D date codes if anyone has some?
spike302- Posts : 5
Join date : 2019-05-09
spike302- Posts : 5
Join date : 2019-05-09
Fairlane
spike302 Wed 3 Jul - 16:07
Hey Boss429 is Fairlane still for sale as if so email me as interested in buying?
spike302- Posts : 5
Join date : 2019-05-09
Similar topics» 289 Hipo Heads
» heads what are they worth?
» Wtb Boss 429 heads
» Are these heads worth swapping to my engine?
» F460 iron heads worth it?
» heads what are they worth?
» Wtb Boss 429 heads
» Are these heads worth swapping to my engine?
» F460 iron heads worth it?
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum