No more aftermarket iron blocks

Mark Miller wrote:

supervel45 wrote:LoL!

https://www.fordracingbyspeedshopdirect.com/product_p/m-6010-a460xbb.htm?1=1&CartID=0

I'm confused the guys here said they're sold out but that link says they have 6 in stock although they're $300.00 more?

That price includes shipping. My intel may have been incorrect where I was told all 62 went to a big box house. Now I'm thinking that 62 went to a big box house. That would either be Summit or Jegs.
I bet those 6 blocks are gone.

For me I'm 45 minutes from Livonia so I'm in line to pick up directly.

Mark O'Neal wrote:Maybe you can step up and manufacture a 2,000 dollar 2,000hp capable block.

Sounds like you have it figured out.

Backing you up on that. Dart has the Big M at $4,312 for either short or tall deck. I didn't see the Windsor iron block listed anywhere (oh no).
Fords price is more than in line with others and this sucky Biden world that we live in.

People should realize that you can get Ford Performance Parts through any dealership however, all Ford dealerships are not necessarily Ford Performance Parts outlets.
AND, there are also a lot of outlets who are not Ford dealerships.

The A460X (not A460XBB) landed on Summit for $3,255 Special order with delivery this December.
https://www.summitracing.com/parts/fms-m-6010-a460x#overview

What a buy!

Mark Miller wrote:

supervel45 wrote:LoL!

https://www.fordracingbyspeedshopdirect.com/product_p/m-6010-a460xbb.htm?1=1&CartID=0

I'm confused the guys here said they're sold out but that link says they have 6 in stock although they're $300.00 more?

I Don't Know about the Availibilty Mark. It is Free Shipping so That may be why It's Higher.

I Guess it's Cyote or Godzilla Time for me Then.

You Can at Least get some used SBF Blocks at a Decent Price is what I sorta meant.

The M-6210-A460-X I Believe is $3,250 at Summit. So There is a Little Break. Still Have to Pay for Boring but, I would think you would still be Ahead on savings that way.

I didn't even see your post Dave before I Typed, was on the Fly. Yelp Same

Hey Super,
At $3,250 shipped to your door, there is a God. You wont find another more capable big block for the money.

Dave De wrote:Hey Super,
At $3,250 shipped to your door, there is a God. You wont find another more capable big block for the money.

Don't Tempt Me Dave, But, You Are Very Correct.

I Just Bought a Narrowed Dana 60 $ 4 Link Yesterday and Two (2) New 32/14 Slicks.

That Stung The FJB Funny Money Tap A Tad.

Need to Sell Some Junk for The Block in Time.

Also Got Quotes on Doing My D9 Nice. The X Block at Summit is Hard to Say NO To, For Sure at The Higher/Highest Level, When You Get Serious About HP





^ PI Heads on SAM's Lobby Floor Friday We SHALL SEE

Dave De wrote:The A460X  (not A460XBB) landed on Summit for $3,255 Special order with delivery this December.
https://www.summitracing.com/parts/fms-m-6010-a460x#overview

What a buy!

SOLD!  Just put my order in to Summit. $3450.29 to my forklift. Est shop date Dec 11. I’m on no hurry.
Std 4.360 bore.
If other distributors on this site can get a deal in the ballpark of this, pleas speak up. Seems like a bargain, even if I bore to 4.500. At the least, small bore gives a bunch of shelf piston options.

Dave De wrote:

Mark Miller wrote:

supervel45 wrote:LoL!

https://www.fordracingbyspeedshopdirect.com/product_p/m-6010-a460xbb.htm?1=1&CartID=0

I'm confused the guys here said they're sold out but that link says they have 6 in stock although they're $300.00 more?

That price includes shipping. My intel may have been incorrect where I was told all 62 went to a big box house. Now I'm thinking that 62 went to a big box house. That would either be Summit or Jegs.
I bet those 6 blocks are gone.

For me I'm 45 minutes from Livonia so I'm in line to pick up directly.

Look's Like Mark Bought a Bunch of Them, Dave.

PS: NO SHIPPING. Must Have To Pick Them UP Local in Liberty/China/Beaumont Tx.?

https://www.facebook.com/commerce/listing/1043741556944354/?media_id=0&ref=share_attachment

norm wrote:The castings look a lot different than the last generation of them.

X2 my cousin bought a A-460 Block probably 20 Years ago[he later sold it never used it] and i don't recall the outside of the block or the lifter valley looking like the new one in the pictures above!!

I'll Say This Much, Those Bright Shinny Splayed 4 Bolt Main Caps and Extra Ribbing Sure Make For One Good Looking 460 Block.