Put a little altitude on the old mud truck
4 posters
Page 1 of 1
Put a little altitude on the old mud truck
Did some trading and came up wtih a set of 38's for the truck Hope I got the power to turn them, if not I'll have to have Lem mail me some more power.
schmitty- Posts : 4538
Join date : 2008-12-02
Age : 54
Location : Holdrege, NE
Re: Put a little altitude on the old mud truck
looks good like the look of the 38s
Northwest outlaw- Posts : 962
Join date : 2009-06-27
Age : 48
Location : Pinehurst Idaho
Re: Put a little altitude on the old mud truck
I'm amazed that they went on without any suspension or body lift. There will need to be a little front fender and bumper trimming though.
schmitty- Posts : 4538
Join date : 2008-12-02
Age : 54
Location : Holdrege, NE
Re: Put a little altitude on the old mud truck
Looks good Rob. I wouldn't worry about any clearance for the fronts. Just take it out to that coulee behind your house and after a few passes, it should have plenty of clearance.
Doug...
Doug...
ThndrChkn- Posts : 2216
Join date : 2008-12-04
Age : 57
Location : Helena, Montana
Re: Put a little altitude on the old mud truck
Yep already ran a few passes out in the pasture beside the house. Hooks up good and runs straight. Might need some ladder bars in the future.
schmitty- Posts : 4538
Join date : 2008-12-02
Age : 54
Location : Holdrege, NE
Re: Put a little altitude on the old mud truck
Rob I can see it good now. The cell phone screen is a little small even with bifocals .
I did a 4" suspension lift on my front for 38's. The wheel wells on the rear were already trimmed.
I did a 4" suspension lift on my front for 38's. The wheel wells on the rear were already trimmed.
f250mike- Posts : 628
Join date : 2009-03-28
Age : 60
Location : Rensselaer, Indiana
Similar topics
» New Truck!!!!
» Track testing Saturday night
» Dove heads on stock 460
» new truck 6.2 or 3.5 eco
» New Truck
» Track testing Saturday night
» Dove heads on stock 460
» new truck 6.2 or 3.5 eco
» New Truck
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum