Paint is done (pics)

EVE wrote:

8liter wrote:Adam

Its prolly been asked before, but where is the hood from?

Casey

Glasstek custom made it for me. It's a 6" later fox scoop on a 4 eye hood. They will make it for anyone if you call them up and ask.

You remember what it set you back?

8liter wrote:

EVE wrote:

8liter wrote:Adam

Its prolly been asked before, but where is the hood from?

Casey

Glasstek custom made it for me. It's a 6" later fox scoop on a 4 eye hood. They will make it for anyone if you call them up and ask.

You remember what it set you back?

I think it was about $600 for some reason. You pretty much pay for a 4 eye hood and then pay $200 for a cowl. I needed one with sloped sides like that because my regulator mounts to my valve cover. The hat actually touches the hood, there isn't a lot of room in there.

See what I mean? The feed line for the regulator is ran like that because any other way it hits the hood where it transition from the cowl to the flat part. Also please excuse my random red wire by the radiator hose. We were at the track and my oil return pump was acting up.




The BOV's barely clear on the other side. I always get asked why I ran the cold side tubing like that and there are three reasons.
The hat won't clear the hood facing forwards
easy upgrade to air to water intercooler
carb builder wanted the hat at 6:00 or 12:00

Thanks again to everyone for the compliments. It is nice to know that your hard work doesn't go unnoticed. I will continue to post updates in here as progress is made. Some engine changes have been made but it will still look the same as it does in the pics above but make ALOT more power.

we like more power