what year is the start of the counterweight on the back of the balancer?
4 posters
Page 1 of 1
what year is the start of the counterweight on the back of the balancer?
what year is the start of the counterweight on the back of the balancer?
bigunitmudracing- Posts : 159
Join date : 2010-12-12
Location : hurley, wi
Re: what year is the start of the counterweight on the back of the balancer?
if you mean the 460 ford, sept ,1978 foward
BOSS 429- Posts : 2371
Join date : 2009-08-10
Location : Ill
Re: what year is the start of the counterweight on the back of the balancer?
Get this one....
I just picked up a motor out of an 87 f350, carbed engine...
and the block castings are DIVE
but it has the counterweight on the front of the crank...
wierd
I just picked up a motor out of an 87 f350, carbed engine...
and the block castings are DIVE
but it has the counterweight on the front of the crank...
wierd
bigunitmudracing- Posts : 159
Join date : 2010-12-12
Location : hurley, wi
Re: what year is the start of the counterweight on the back of the balancer?
Sounds like someone rebuilt it. An external balance crank will work in a internal balance block ,but not the other way.
56Tbird- BBF CONTRIBUTOR
- Posts : 5260
Join date : 2008-12-02
Age : 65
Location : Hawesville,Ky.
Re: what year is the start of the counterweight on the back of the balancer?
I have D9TE block in my Model A with an early internal balanced rotating assembly. it was a lot of work, grinding inside to clear the crank throws, but it can be done. putting a late external balance rotating assembly in an early block is a piece of cake.
Wayne (SAWDOFF) Pearce
Wayne (SAWDOFF) Pearce
starliner- Posts : 2
Join date : 2009-08-22
Similar topics
» BAD START FOR THE YEAR...
» getting back in the game!545 start up opinions
» Pro comp heads in the final last year semi's this year.
» 460 Front Counterweight
» Center counter weights on crank...
» getting back in the game!545 start up opinions
» Pro comp heads in the final last year semi's this year.
» 460 Front Counterweight
» Center counter weights on crank...
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|