Project CIII

QtrWarrior wrote:

res0rli9 wrote:Hell you got enough room to a Boss 9 in there...

Funny you should say that...
Before Dad passed, he talked about doing exactly that..
I was afraid it would make the car too nose heavy...

Well you should bring his Dream alive.

res0rli9 wrote:

QtrWarrior wrote:

res0rli9 wrote:Hell you got enough room to a Boss 9 in there...

Funny you should say that...
Before Dad passed, he talked about doing exactly that..
I was afraid it would make the car too nose heavy...

Well you should bring his Dream alive.

Rollbar and 5-point harness in the new/redesign of the over tubs fold down "Rumble Seat"

Note - all participants in the "rumble seat" ride must make the minimum weight requirements, as it is critical to the outcome of the ride

Nothing wrong with sorting out the car with a SBF, getting everything working the way you want, then making adjustments for the changes you may want in the future (BOSS9), it will be badazz no mater how you decide to do it, and just because you started it that way doesn't mean you can't change it later.

Happy B-Day

Well Gentlemen...It's like this................lol

Using a small block, I can go from 410W to, blown Cleveland to,... in no time.
And I have the collection of parts to build those..
I've sat a 460 block in there, and while it fits with lots of room, There is too much hanging out past the frt crossmember.
This one is/ was being built to be a street "playtoy".
Not to say I won't take it to the track, but that is not the main focus..

I have seen the little car in person with that 410w it will be a nice cruiser and will hurt some feeling take some pride away when them chevy boys want to try and jump on it.

Bump, progress?... And where are the pics of the 64 Ranchero (Ute)what are you doing to that?

The Ranchero.. I've been working on collecting basic parts I need. Still need to do the sheetmetal work ( Floorpans, rear of cab at floor)

The CIII.. Finally worked out some of the front end details.. Test fit the 410W...

Cool,
Nice projects, if you bust a knuckle changing plugs you lost focus, or are drunk...tons of room

Let's drag this one back to the top.....
Need to get it done to go....Hunting....

Did the pictures get photo-phucked-it?

68formalGT wrote:Did the pictures get photo-phucked-it?

Yes they did...

Man that decision sure screwed up the forums

Bump..... actually working on it?

dfree383 wrote:Bump..... actually working on it?

Yup.....
And your name might be on the "list"....

I don't have the coin you do, to pay other people to do it for me.....js

Bump for the slacker

Did somebody say something ???

QtrWarrior wrote:Did somebody say something ???

Any progress other than more rust?

dfree383 wrote:

QtrWarrior wrote:Did somebody say something ???

Any progress other than more rust?

You mean like your 70 and the 85 ??
Bet the dust in an inch thick on the racecar too....

QtrWarrior wrote:

dfree383 wrote:

QtrWarrior wrote:Did somebody say something ???

Any progress other than more rust?

You mean like your 70 and the 85 ??
Bet the dust in an inch thick on the racecar too....

Nope...... 2008 is shiney and running, 70 is in the body shop and the motor is almost ready for the dyno, the motor is done for the 85 and waiting for me to get the car, even got a 428 for the 66 half way done.

Chero still rusting?

You sure you two aren't brothers separated at birth...? Sure do fight like y'all are...

QtrWarrior wrote:

dfree383 wrote:Bump..... actually working on it?

Yup.....
And your name might be on the "list"....

I don't have the coin you do, to pay other people to do it for me.....js

I might be mistaken but it sounds a lot like a Grudge race to me...$$$ and hammers down, only one can be

Bump for some motivation

Bump to keep the old guy moving....... He's going to rust in place

QtrWarrior wrote:<yawn> get off my leg fatboy...

I don't pay other people to build my cars...
Sort of defeats the purpose...

Yep what I figured, sleeping in the job and not getting anything done