selling rule questions
+8
dave d
jeffgfg
racnrick
bbf-falcon
richter69
bruno
Dave C.
rcasonbbf
12 posters
Page 1 of 2
Page 1 of 2 • 1, 2 
selling rule questions
rcasonbbf February 22nd 2014, 8:51 am
Posted ad In for sale section. Someone posted rules for selling. I had price and location, no pics cause using a smart phone can't load them. Is it because don't have enough posts, can't get post count up if not allowed to post. Thank guys. Also did my ad get erased?
rcasonbbf- Posts : 26
Join date : 2013-06-30
Re: selling rule questions
Dave C. February 22nd 2014, 9:45 am
Not sure why or if you've been deleted ,but It would be a good idea to introduce yourself and let everyone know what kinda vehicle you're working on . Interact with some of the other posts for a while to let the guys get to know you a little bit. It's an attempt to keep someone from becoming a member only to rip other members off ...
Dave C.- Posts : 1268
Join date : 2013-03-23
Re: selling rule questions
rcasonbbf February 22nd 2014, 9:50 am
I've been here before, had a few interactions. Its been a while. I do more buisness on the other forum, it seems easier to use. Would u check my D20e ad was deleted? Been on the other forum for a while.
rcasonbbf- Posts : 26
Join date : 2013-06-30
Re: selling rule questions
bruno February 22nd 2014, 10:02 am
yes post , in other threads , substance , make a contribution to the site as far as asking questions or helping with issues !!!!
my rules my house .... and yes I just deleted your ad
my rules my house .... and yes I just deleted your ad
_________________
coming soon x275 build .........
thanks to all my sponsors :
www.OakleyMotorsports.com
www.Induction-Solutions.com
www.bfevansraceparts.com
www.ultimateconverter.com
www.keithfulpmotorsports.com
bruno- Moderator
- Posts : 10876
Join date : 2008-12-02
Age : 51
Location : MILLBROOK , AL. -
Re: selling rule questions
rcasonbbf February 22nd 2014, 10:07 am
No prob Bruno. Where does it say how many posts I have or can u tell me? The # of posts was the prob? Thanks Bruno. Is the !!! mean you r yelling at me? Didn't mean to insult anyone. Again thanks.
rcasonbbf- Posts : 26
Join date : 2013-06-30
Re: selling rule questions
bruno February 22nd 2014, 10:15 am
25 posts .... and im not yelling !! 
THIS IS YELLING !!!!!!!
THIS IS YELLING !!!!!!!
_________________
coming soon x275 build .........
thanks to all my sponsors :
www.OakleyMotorsports.com
www.Induction-Solutions.com
www.bfevansraceparts.com
www.ultimateconverter.com
www.keithfulpmotorsports.com
bruno- Moderator
- Posts : 10876
Join date : 2008-12-02
Age : 51
Location : MILLBROOK , AL. -
rcasonbbf- Posts : 26
Join date : 2013-06-30
richter69- Posts : 13649
Join date : 2008-12-02
Age : 53
Location : In the winners circle
rcasonbbf- Posts : 26
Join date : 2013-06-30
richter69- Posts : 13649
Join date : 2008-12-02
Age : 53
Location : In the winners circle
Re: selling rule questions
bbf-falcon February 22nd 2014, 4:51 pm
Welcome to the board,tell us about your ride and we'll have you your 25 posts so fast you will be trying to sell us your ole lady and yunguns.
bbf-falcon- Posts : 8995
Join date : 2008-12-03
Location : Jackson, Ohio
Re: selling rule questions
rcasonbbf February 22nd 2014, 5:22 pm
Its a 92 notch ex police car with branded title. Had a stock 460 with lunati cam. Sounded OK. Only got to drive it 3 miles. Decided to up compression with thunder jet heads. Only ran in driveway. In process found a lot of stuff loose on car. trans bolts too long tight but not, loose fuel line, loose driveshaft bolts, missing torque converter stud and nut, etc. So decided to take completely apart. 3 years later going back together. I am temporarily putting in a 40 over 429 but have collected some nice parts for a 466 build. A Bryant crank from when the father was running things there. Eagle h beams, arias dome 13:1 pistons and the PI heads I posted illegally. I recently bought a set of alum CJ heads so no longer need PI heads for my build. Will just have my dome pistons milled a bit. Just a little info on my build. How do
I post pics on here?
I post pics on here?
rcasonbbf- Posts : 26
Join date : 2013-06-30
Re: selling rule questions
racnrick February 22nd 2014, 5:44 pm
rcasonbbf wrote:
1 Its a 92 notch ex police car with branded title.
2 Had a stock 460 with lunati cam. Sounded OK. Only got to drive it 3 miles.
3 Decided to up compression with thunder jet heads. Only ran in driveway.
4 In process found a lot of stuff loose on car. trans bolts too long tight but not, loose fuel line, loose driveshaft bolts, missing torque converter stud and nut, etc. So decided to take completely apart.
5 3 years later going back together.
6 I am temporarily putting in a 40 over 429 but have collected some nice parts for a 466 build.
7 A Bryant crank from when the father was running things there. Eagle h beams, arias dome 13:1 pistons and the PI heads I posted illegally.
8 I recently bought a set of alum CJ heads so no longer need PI heads for my build. Will just have my dome pistons milled a bit.
9 Just a little info on my build.
10 How do I post pics on here?
If you would have split that long post up like I did in the quote, you would have had about 20 posts by now,
there are many ways to get around rules 
Just keep posting,,, where you from,,, do you have a dog or cat,,, if you have a cat do you think it can kick the crap out of Fabio's cat,,, 
do you know Less,,, do you know Hobbs, or have a mullet,,, 
racnrick- Posts : 462
Join date : 2008-12-03
Age : 68
Location : Puyallup, WA
Re: selling rule questions
rcasonbbf February 22nd 2014, 5:48 pm
Is each reply a post? Or start a new subject each time?
rcasonbbf- Posts : 26
Join date : 2013-06-30
rcasonbbf- Posts : 26
Join date : 2013-06-30
rcasonbbf- Posts : 26
Join date : 2013-06-30
Re: selling rule questions
rcasonbbf February 22nd 2014, 5:51 pm
Don't know Fabios cat, don't know less, no mullet.
rcasonbbf- Posts : 26
Join date : 2013-06-30
Re: selling rule questions
bbf-falcon February 22nd 2014, 5:52 pm
Now we're talkin Your 25 posts will be here before u know it. It's not written in the rules but because you tried to sell those PI heads w/o enough posts,you will now need to send them to my address and pay for shipping.
Your 25 posts will be here before u know it. It's not written in the rules but because you tried to sell those PI heads w/o enough posts,you will now need to send them to my address and pay for shipping.
bbf-falcon- Posts : 8995
Join date : 2008-12-03
Location : Jackson, Ohio
Re: selling rule questions
rcasonbbf February 22nd 2014, 5:59 pm
Lol. Already on their way. Would probably cover shipping or at least partially with a sale. I am expecting your PayPal payment any minute.
rcasonbbf- Posts : 26
Join date : 2013-06-30
Re: selling rule questions
jeffgfg February 22nd 2014, 6:15 pm
I was the one who asked for flow numbers on the PI heads. The reason I asked was because you are asking a lot for the heads and to justify buying them I would like to have some flow numbers. I can buy aluminum heads cheaper than the PI's with known flow numbers. Not bashing you or the heads just explaining maybe why they haven't sold on the "other" site. Good luck with the sale. Stay away from the "HeRo's" cat and beware of men in sombrero's!!!
jeffgfg- Posts : 338
Join date : 2010-02-06
richter69- Posts : 13649
Join date : 2008-12-02
Age : 53
Location : In the winners circle
dave d- Posts : 809
Join date : 2009-12-22
Age : 65
Location : nwohio
Re: selling rule questions
rcasonbbf February 22nd 2014, 6:25 pm
Ur probably right. Will see if I can get some flow #s from powered by ford next week. What is average price to get them.flow benched. I haven't asked around local yet.
rcasonbbf- Posts : 26
Join date : 2013-06-30
richter69- Posts : 13649
Join date : 2008-12-02
Age : 53
Location : In the winners circle
bbf-falcon- Posts : 8995
Join date : 2008-12-03
Location : Jackson, Ohio
Page 1 of 2 • 1, 2
Similar topics» OLD GUYS RULE
» Old Guys Rule
» SCJ and ported C8 472'' in the works (both finally done)
» Congrats Dan Hobbs, For WINNING Quick 8
» Aluminum Head rule
» Old Guys Rule
» SCJ and ported C8 472'' in the works (both finally done)
» Congrats Dan Hobbs, For WINNING Quick 8
» Aluminum Head rule
Page 1 of 2
Permissions in this forum:
You cannot reply to topics in this forum